Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: oldturkey03 (stem details) ,

Titel:

Why doesn't my new screen turn on?

Tekst:

iPhone 6 with a dead display. Original screen was cracked after a drop. Initially the cracked screen did work, just hard to see what was being displayed and touch didn't work.

I purchased a new screen, product code IF268-001-1. Move some components from old screen to new screen and installed it without issue. Unfortunately the new screen doesn't turn on.

I've disconnected the battery and let it sit for a few hours. Still no luck.

I've held the power and home button for 10 seconds, 30 second, 1 minute and 1.5 minutes. None of those turned the screen on.

When connected to the PC and iTunes it is detected and seems to still work as it should.

I tried the old display and that one doesn't work either? I've inspected the components inside the phone and none of them look to be damaged.

Any suggestions?

=== Update (05/27/2015) ===

This is the best I could do with my camera. Thoughts? Looks like the pins are OK on the display and the board.

[image|574254]

[image|574253]

[image|574261]

[image|574257]

Apparaat:

iPhone 6

Status:

open

Goedgekeurd antwoord:

232142

Bewerkt door: anonymous 4142 ,

Titel:

Why doesn't my new screen turn on?

Tekst:

iPhone 6 with a dead display. Original screen was cracked after a drop. Initially the cracked screen did work, just hard to see what was being displayed and touch didn't work.
 
I purchased a new screen, product code IF268-001-1. Move some components from old screen to new screen and installed it without issue. Unfortunately the new screen doesn't turn on.
 
I've disconnected the battery and let it sit for a few hours. Still no luck.
 
I've held the power and home button for 10 seconds, 30 second, 1 minute and 1.5 minutes. None of those turned the screen on.
 
When connected to the PC and iTunes it is detected and seems to still work as it should.
 
I tried the old display and that one doesn't work either? I've inspected the components inside the phone and none of them look to be damaged.
 
Any suggestions?
 
=== Update (05/27/2015) ===
 
This is the best I could do with my camera. Thoughts? Looks like the pins are OK on the display and the board.
 
[image|574254]
 
[image|574253]
 
[image|574261]
 
[image|574257]

Apparaat:

iPhone 6

Status:

open

Origineel bericht door: anonymous 4142 ,

Titel:

Why doesn't my new screen turn on?

Tekst:

iPhone 6 with a dead display. Original screen was cracked after a drop. Initially the cracked screen did work, just hard to see what was being displayed and touch didn't work.

I purchased a new screen, product code IF268-001-1. Move some components from old screen to new screen and installed it without issue. Unfortunately the new screen doesn't turn on.

I've disconnected the battery and let it sit for a few hours. Still no luck.

I've held the power and home button for 10 seconds, 30 second, 1 minute and 1.5 minutes. None of those turned the screen on.

When connected to the PC and iTunes it is detected and seems to still work as it should.

I tried the old display and that one doesn't work either? I've inspected the components inside the phone and none of them look to be damaged.

Any suggestions?

Apparaat:

iPhone 6

Status:

open