Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Kris Rodriguez (stem details) ,

Titel:

Can't disconnect camera cable

Tekst:

I'm trying to get the logic board out, but I can't seem to get the camera cable disconnected from it. Seems in there pretty tight, and I don't want to break it by pulling too hard. There's a bit of paste around it but I think that's only holding the socket in, not the cable. Anyone have a trick for this?

(early 2011 Macbook Pro 13 inch A1278)

Apparaat:

MacBook Pro 13" Unibody Early 2011

Status:

-open
+closed

Goedgekeurd antwoord:

225858

Bewerkt door: ingwis ,

Titel:

Can't disconnect camera cable

Tekst:

I'm trying to get the logic board out, but I can't seem to get the camera cable disconnected from it. Seems in there pretty tight, and I don't want to break it by pulling too hard. There's a bit of paste around it but I think that's only holding the socket in, not the cable. Anyone have a trick for this?

(early 2011 Macbook Pro 13 inch A1278)

Apparaat:

MacBook Pro 13" Unibody Early 2011

Status:

open

Goedgekeurd antwoord:

+225858

Origineel bericht door: ingwis ,

Titel:

Can't disconnect camera cable

Tekst:

I'm trying to get the logic board out, but I can't seem to get the camera cable disconnected from it. Seems in there pretty tight, and I don't want to break it by pulling too hard. There's a bit of paste around it but I think that's only holding the socket in, not the cable. Anyone have a trick for this?

(early 2011 Macbook Pro 13 inch A1278)

Apparaat:

MacBook Pro 13" Unibody Early 2011

Status:

open