Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Heather Shanks ,

Tekst:

First, make sure your vacuum is plugged in. If it is plugged in and the power button is on, youryou may need to reset your circutcircuit breaker. If that option doesn't work, try resetting the motor thermostat. The steps to reset the motor thermostat can be found on the [[Shark Navigator Troubleshooting#Section_If_vacuum_still_does_not_run_try_Resetting_the_Motor_Thermostat|troubleshooting page]].
First, make sure your vacuum is plugged in. If it is plugged in and the power button is on, youryou may need to reset your circutcircuit breaker. If that option doesn't work, try resetting the motor thermostat. The steps to reset the motor thermostat can be found on the [[Shark Navigator Troubleshooting#Section_If_vacuum_still_does_not_run_try_Resetting_the_Motor_Thermostat|troubleshooting page]].
 
If none of the above work, your cord may be broken.

Status:

open

Origineel bericht door: Heather Shanks ,

Tekst:

First, make sure your vacuum is plugged in.  If it is plugged in and the power button is on, your may need to reset your circut breaker.  If that option doesn't work, try resetting the motor thermostat.  The steps to reset the motor thermostat can be found on the [[Shark Navigator Troubleshooting#Section_If_vacuum_still_does_not_run_try_Resetting_the_Motor_Thermostat|troubleshooting page]].

If none of the above work, your cord may be broken.

Status:

open