Origineel bericht door: originalmachead ,
'''Don't know if you unlocked the ZIF connector''' (step 14) if you didn't you cant put the cable back in far enough to make contact (reverse of step 15). '''Go over the connector again.''' remove your tape and unlock before futzing with your new connection. If the connector moves to the right (unlock) then ''holding the connector in that position reinsert and push/pull the ribbon in as far as it will go.'' '''I find using some blue painters masking tape to create a strap or handle on the ribbon cable ''(something to pull on)'' helps'''. After the cable is in as far as it will go then rotate the connector left. Test your device. If the connector is destroyed a computer/small electronics repair shop may be able to remove the damaged one and affix a replacement. ''If this answer is acceptable '''please remember to return and mark it accepted'''.''