Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: oldturkey03 ,

Tekst:

Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. By continuing to try to charge it or using it, you are increasing the chance of a short circuit. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the salegross contamination. Then clean it with +90% isopropyl alcohol and a soft brush. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.
Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. By continuing to try to charge it or using it, you are increasing the chance of a short circuit. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the salegross contamination. Then clean it with +90% isopropyl alcohol and a soft brush. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. By continuing to try to charge it or using it, you are increasing the chance of a short circuit. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the sale. Then clean it with +90% isopropyl alcohol and a soft brush.brush. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.
Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. By continuing to try to charge it or using it, you are increasing the chance of a short circuit. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the sale. Then clean it with +90% isopropyl alcohol and a soft brush.brush. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. HereBy continuing to try to charge it or using it, you are increasing the chance of a short circuit. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the sale. Then clean it with +90% isopropyl alcohol and a soft brush.. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.
Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. HereBy continuing to try to charge it or using it, you are increasing the chance of a short circuit. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the sale. Then clean it with +90% isopropyl alcohol and a soft brush.. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component. Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.

Status:

open

Origineel bericht door: oldturkey03 ,

Tekst:

Natalia Torres, the best thing to do is to stop using the device, (remove the battery) and to totally disassemble it. Here are [https://www.ifixit.com/Device/iPhone_4_Verizon#guideList|the guides] to help you with that. Use some sterile water and rinse the parts off to remove the sale. Then clean it with +90% isopropyl alcohol and a soft brush.. This will displace the water and stop corrosion. Use [guide|5825|this guide] to get it cleaned. It is written for a 3G but applies to your phone as well. It is okay to submerge a board in isopropyl alcohol. After that, air dry all the components. Do not forget to clean the connectors on the board as well as the cables. Then re-assemble with a '''new battery''' This is not optional but a must to avoid failure later on. Check your board for any missing or damaged component.  Water damage is the toughest to trouble shoot and to repair. Hope this helps, good luck.

Status:

open