Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: bigboss59400 ,

Titel:

Backlight issue => bad connector screen solderings?

Tekst:

Hello,
 
I get an iphone 5 which go into some water (red sticker)
 
[image|345306|align=left]
 
[image|345419image|345419|align=left]
[image|345419image|345419|align=left]
 
All is working except the backlight which works but at a low level so to determine if it was a problem from the motherboard or the backlight itself, I put another working screen on it and.... the same thing however when I test it the screen wasn't in its compartiment so I can slightly moved the screen (and the connector is a little affect to this action too) and the backlight is directly affect; more bright or less depend on the orientation of the screen.
 
So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip
 
Thanks

Apparaat:

iPhone 5

Status:

open

Goedgekeurd antwoord:

169701

Bewerkt door: bigboss59400 ,

Titel:

Backlight issue => bad connector screen solderings?

Tekst:

Hello,
 
I get an iphone 5 which go into some water (red sticker)
 
[image|345306|align=left]
 
[image|345382|align=leftimage|345419]
[image|345382|align=leftimage|345419]
 
All is working except the backlight which works but at a low level so to determine if it was a problem from the motherboard or the backlight itself, I put another working screen on it and.... the same thing however when I test it the screen wasn't in its compartiment so I can slightly moved the screen (and the connector is a little affect to this action too) and the backlight is directly affect; more bright or less depend on the orientation of the screen.
 
So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip
 
Thanks

Apparaat:

iPhone 5

Status:

open

Bewerkt door: bigboss59400 ,

Titel:

Backlight issue => bad connector screen solderings?

Tekst:

Hello,
 
I get an iphone 5 which go into some water (red sticker)
 
[image|345306][image|345382]image|345306|align=left]

[image|345382|align=left]
[image|345306][image|345382]image|345306|align=left]

[image|345382|align=left]
All is working except the backlight which works but at a low level so to determine if it was a problem from the motherboard or the backlight itself, I put another working screen on it and.... the same thing however when I test it the screen wasn't in its compartiment so I can slightly moved the screen (and the connector is a little affect to this action too) and the backlight is directly affect; more bright or less depend on the orientation of the screen.
 
So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip
 
Thanks

Apparaat:

iPhone 5

Status:

open

Bewerkt door: bigboss59400 ,

Titel:

Backlight issue => bad connector screen solderings?

Tekst:

Hello,
 
I get an iphone 5 which go into some water (red sticker)
 
[image|345306][image|345382]
All is working except the backlight which works but at a low level so to determine if it was a problem from the motherboard or the backlight itself, I put another working screen on it and.... the same thing however when I test it the screen wasn't in its compartiment so I can slightly moved the screen (and the connector is a little affect to this action too) and the backlight is directly affect; more bright or less depend on the orientation of the screen.
[image|345306]
[image|345306]
So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip
 
 
 
Thanks

Apparaat:

iPhone 5

Status:

open

Bewerkt door: bigboss59400 ,

Titel:

Backlight issue => bad connector screen solderings?

Tekst:

Hello,
 
I get an iphone 5 which go into some water (red sticker)
 
All is working except the backlight which works but at a low level so to determine if it was a problem from the motherboard or the backlight itself, I put another working screen on it and.... the same thing however when I test it the screen wasn't in its compartiment so I can slightly moved the screen (and the connector is a little affect to this action too) and the backlight is directly affect; more bright or less depend on the orientation of the screen.
[image|345306]
So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip
 
 
So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip
 
Thanks

Apparaat:

iPhone 5

Status:

open

Origineel bericht door: bigboss59400 ,

Titel:

Backlight issue => bad connector screen solderings?

Tekst:

Hello,

I get an iphone 5 which go into some water (red sticker)

All is working except the backlight which works but at a low level so to determine if it was a problem from the motherboard or the backlight itself, I put another working screen on it and.... the same thing however when I test it the screen wasn't in its compartiment so I can slightly moved the screen (and the connector is a little affect to this action too) and the backlight is directly affect; more bright or less depend on the orientation of the screen.

So I looked closely on the screen connector and it seems that the screen connector is badly solder on 4 pins (judge by yourself thanks to my pictures), can you tell me or confirm that these pins are used by the backlight ? or just send me the scematics of this chip

Thanks

Apparaat:

iPhone 5

Status:

open