Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: Brad S ,

Tekst:

I recentlyThis is a slight edit considering I browsed through my old answer and even I found it a little confusing: I had a logic board accident with my Earlyearly 2011 MBPMBP, model a1286 (my bad) butand was thinking of replacing it with a Mid-2012 (non-Retina) board for the CPU/GPU boost (I'm a gamer and a Mac user... figure that one out) as well asand the upgrade from USB 2 to USB 3 ports.
I recentlyThis is a slight edit considering I browsed through my old answer and even I found it a little confusing: I had a logic board accident with my Earlyearly 2011 MBPMBP, model a1286 (my bad) butand was thinking of replacing it with a Mid-2012 (non-Retina) board for the CPU/GPU boost (I'm a gamer and a Mac user... figure that one out) as well asand the upgrade from USB 2 to USB 3 ports.
 
I found a decent deal online but for the life of me I can't I couldn’t find the opinions of anyone who'swho ever tried it. The iFixit teardowns and logic board replacement guides for both models (2011/2012) seem identical along with all of the tech specs about the wattage/voltage/etc. but the only opinion I've I heard is from a repair shop guy on e-bay who sayssaid the upgrade wouldn't work (but I think he'she was just trying to sell me his repair services).
I found a decent deal online but for the life of me I can't I couldn’t find the opinions of anyone who'swho ever tried it. The iFixit teardowns and logic board replacement guides for both models (2011/2012) seem identical along with all of the tech specs about the wattage/voltage/etc. but the only opinion I've I heard is from a repair shop guy on e-bay who sayssaid the upgrade wouldn't work (but I think he'she was just trying to sell me his repair services).
 
I'mI was actually amazed that there isn'twasn’t more information about this kind of thing on the internet (with all the menial stuff like hacking your xbox and tricking out your iphone). For the life of me, I can't see why this 'upgrade' wouldn't work, and you guysthe iFix it forums have instilled some modicum of confidence in me so since the shop I'm buying from has a money-back guaranteeme… I think I'm goingdecided to try it. I'll try to make a video (since there seem to be none concerning this) about it to document my failure/success.it!
I'mI was actually amazed that there isn'twasn’t more information about this kind of thing on the internet (with all the menial stuff like hacking your xbox and tricking out your iphone). For the life of me, I can't see why this 'upgrade' wouldn't work, and you guysthe iFix it forums have instilled some modicum of confidence in me so since the shop I'm buying from has a money-back guaranteeme… I think I'm goingdecided to try it. I'll try to make a video (since there seem to be none concerning this) about it to document my failure/success.it!
 
Wish me luck!!I placed my order for a logic board; but I was still a bit worried so I got board (hehe) and decided to see if there were any significant differences. This is an overlay of the two logic boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seem to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:
Wish me luck!!I placed my order for a logic board; but I was still a bit worried so I got board (hehe) and decided to see if there were any significant differences. This is an overlay of the two logic boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seem to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:
 
Edit: Placed my order for a logic board but I'm still a bit worried so I got board (hehe) and decided to see if there were any significant differences I should worry about. This is an overlay of the two boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seems to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:[image|318091]
Edit: Placed my order for a logic board but I'm still a bit worried so I got board (hehe) and decided to see if there were any significant differences I should worry about. This is an overlay of the two boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seems to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:[image|318091]
 
[image|318091|align=left]
== Update ==So after a long time waiting, I actually ordered two separate logic boards and they both finally came on the same day.
[image|318091|align=left]
== Update ==So after a long time waiting, I actually ordered two separate logic boards and they both finally came on the same day.
 
Ok, so after a long time waiting, I've actually ordered two separate logic boards== '''Issues''' ==
A minor issue popped up when I was re-applying the heat sinks on the USB controller and they both finally camethe platform controller hub (assuming the heat sinks are necessary on the same day. 2012s). It could have been the supplier I chose or possibly these models don't heat up as much, but the new board didn’t have screw holders like the old one did.
Ok, so after a long time waiting, I've actually ordered two separate logic boards== '''Issues''' ==
A minor issue popped up when I was re-applying the heat sinks on the USB controller and they both finally camethe platform controller hub (assuming the heat sinks are necessary on the same day. 2012s). It could have been the supplier I chose or possibly these models don't heat up as much, but the new board didn’t have screw holders like the old one did.
 
Either way, I came up with a solution. I cannibal-ised my old system, popping off the screw-holders used on the old circuit board and super-gluing them to the new one in the same position. Turns out super glue is non-conductive so it was perfect solution to hold down them down so I could apply some thermal paste.
 
The rest of the ports, cables and screw holes lined up perfectly. Even the cables to the fan that I had broken (I pulled instead of lifted). Needless to say, I was very happy with my current array of upgrades: 2.3 GHz > 2.6 GHz, USB 2 > 3, bluetooth 2.1 > 4, Radeon 6750M > GeForce 650M, RAM: 16GB and the HDD(s) [1TB Hybrid in the SuperDrive bay and a 120GB SSD in the main bay].
 
There was a minor issue when I was re-applyingSo YES, it is totally possible to interchange the heat sinks for the USB controller and the platform controller hub (assuming the heat sinksunibody logic boards (at least early 2011 to later 2011 or 2012) if you are necessary on the 2012s). It could have been the supplier I chose or possibly these modelsso inclined. I don't heat up as much. Either way, I came up with a unique solution where I cannibal-isedthink anything in my old system, popping offsystem (aside from the screw-holders used on the old circuit boardmagsafe adapter, battery, speaker, and super-gluing them to the new one indisplay) is the same position. Turns out super glue is non-conductive so itas when I first purchased it. Mine was perfect solution to hold down them down soa 15in display, but I could apply some thermal pastedon’t see why this process couldn’t work with a 13in (you can never research too much).
There was a minor issue when I was re-applyingSo YES, it is totally possible to interchange the heat sinks for the USB controller and the platform controller hub (assuming the heat sinksunibody logic boards (at least early 2011 to later 2011 or 2012) if you are necessary on the 2012s). It could have been the supplier I chose or possibly these modelsso inclined. I don't heat up as much. Either way, I came up with a unique solution where I cannibal-isedthink anything in my old system, popping offsystem (aside from the screw-holders used on the old circuit boardmagsafe adapter, battery, speaker, and super-gluing them to the new one indisplay) is the same position. Turns out super glue is non-conductive so itas when I first purchased it. Mine was perfect solution to hold down them down soa 15in display, but I could apply some thermal pastedon’t see why this process couldn’t work with a 13in (you can never research too much).
 
Definitely cheaper than purchasing an altogether new system and the upgrade/repairability factor of my unibody (A1826) makes me think I'll have it around for a while longer.
 

The rest of the ports, cables and screw holes lined up perfectly. Even the cables to the fan that I had broken (pulled instead of lifted). My=== Update ===
I did have this system has officially gone from 2.3 GHz > 2.6 GHz, USB 2 > 3, bluetooth 2.1 > 4, Radeon 6750M > GeForce 650M, etc, etc. Not mentioning the previous upgradesaround for a while after I had done to the RAM (16GB)wrote this and the hard drive(s) [1TB Hybrid in the SuperDrive bay and a 120GB SSD in the main bay]. So YES,recently gave it is totally possibleaway to interchange the unibody logic boards if you are so inclinedmy cousin’s kid. I don't think anythinghonestly wish I would have kept it since my new MacBook Pro (a 2016) is actually inferior in my system (aside from the magsafe adapter, battery, speaker,graphics department. The intel iris 550 kinda… sucks at 3d graphics. But live and display) is the same as whenlearn, I first purchased it.



Definitely cheaper than purchasing an altogether newsuppose. My next system and the upgrade/repairability factor of my unibody (A1826) makes me think I'llwill definitely have it around for a while longer. When I get better (I recently had jaw surgery so I can barely talk) I may even make a video about my experience as I'm surprised there aren't any on youtube alreadydedicated graphics chip.

The rest of the ports, cables and screw holes lined up perfectly. Even the cables to the fan that I had broken (pulled instead of lifted). My=== Update ===
I did have this system has officially gone from 2.3 GHz > 2.6 GHz, USB 2 > 3, bluetooth 2.1 > 4, Radeon 6750M > GeForce 650M, etc, etc. Not mentioning the previous upgradesaround for a while after I had done to the RAM (16GB)wrote this and the hard drive(s) [1TB Hybrid in the SuperDrive bay and a 120GB SSD in the main bay]. So YES,recently gave it is totally possibleaway to interchange the unibody logic boards if you are so inclinedmy cousin’s kid. I don't think anythinghonestly wish I would have kept it since my new MacBook Pro (a 2016) is actually inferior in my system (aside from the magsafe adapter, battery, speaker,graphics department. The intel iris 550 kinda… sucks at 3d graphics. But live and display) is the same as whenlearn, I first purchased it.



Definitely cheaper than purchasing an altogether newsuppose. My next system and the upgrade/repairability factor of my unibody (A1826) makes me think I'llwill definitely have it around for a while longer. When I get better (I recently had jaw surgery so I can barely talk) I may even make a video about my experience as I'm surprised there aren't any on youtube alreadydedicated graphics chip.

Status:

open

Bewerkt door: Brad S ,

Tekst:

I recently had a logic board accident with my Early 2011 MBP a1286 (my bad) but was thinking of replacing it with a Mid-2012 (non-Retina) board for the CPU/GPU boost (I'm a gamer and a Mac user... figure that one out) as well as the USB 3 ports.
 
I found a decent deal online but for the life of me I can't find the opinions of anyone who's ever tried it. The iFixit teardowns and logic board replacement guides for both models (2011/2012) seem identical along with all of the tech specs about the wattage/voltage/etc. but the only opinion I've heard is from a repair shop guy on e-bay who says the upgrade wouldn't work (but I think he's just trying to sell me his repair services).
 
I'm actually amazed that there isn't more information about this kind of thing on the internet (with all the menial stuff like hacking your xbox and tricking out your iphone). For the life of me, I can't see why this 'upgrade' wouldn't work, and you guys have instilled some modicum of confidence in me so since the shop I'm buying from has a money-back guarantee I think I'm going to try it. I'll try to make a video (since there seem to be none concerning this) about it to document my failure/success.
 
Wish me luck!!
 
Edit: Placed my order for a logic board but I'm still a bit worried so I got board (hehe) and decided to see if there were any significant differences I should worry about. This is an overlay of the two boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seems to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:[image|318091]photos:

[image|318091|align=left]
== Update ==

Ok, so after a long time waiting, I've actually ordered two separate logic boards and they both finally came on the same day.



There was a minor issue when I was re-applying the heat sinks for the USB controller and the platform controller hub (assuming the heat sinks are necessary on the 2012s). It could have been the supplier I chose or possibly these models don't heat up as much. Either way, I came up with a unique solution where I cannibal-ised my old system, popping off the screw-holders used on the old circuit board and super-gluing them to the new one in the same position. Turns out super glue is non-conductive so it was perfect solution to hold down them down so I could apply some thermal paste.



The rest of the ports, cables and screw holes lined up perfectly. Even the cables to the fan that I had broken (pulled instead of lifted). My system has officially gone from 2.3 GHz > 2.6 GHz, USB 2 > 3, bluetooth 2.1 > 4, Radeon 6750M > GeForce 650M, etc, etc. Not mentioning the previous upgrades I had done to the RAM (16GB) and the hard drive(s) [1TB Hybrid in the SuperDrive bay and a 120GB SSD in the main bay]. So YES, it is totally possible to interchange the unibody logic boards if you are so inclined. I don't think anything in my system (aside from the magsafe adapter, battery, speaker, and display) is the same as when I first purchased it.



Definitely cheaper than purchasing an altogether new system and the upgrade/repairability factor of my unibody (A1826) makes me think I'll have it around for a while longer. When I get better (I recently had jaw surgery so I can barely talk) I may even make a video about my experience as I'm surprised there aren't any on youtube already.
Edit: Placed my order for a logic board but I'm still a bit worried so I got board (hehe) and decided to see if there were any significant differences I should worry about. This is an overlay of the two boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seems to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:[image|318091]photos:

[image|318091|align=left]
== Update ==

Ok, so after a long time waiting, I've actually ordered two separate logic boards and they both finally came on the same day.



There was a minor issue when I was re-applying the heat sinks for the USB controller and the platform controller hub (assuming the heat sinks are necessary on the 2012s). It could have been the supplier I chose or possibly these models don't heat up as much. Either way, I came up with a unique solution where I cannibal-ised my old system, popping off the screw-holders used on the old circuit board and super-gluing them to the new one in the same position. Turns out super glue is non-conductive so it was perfect solution to hold down them down so I could apply some thermal paste.



The rest of the ports, cables and screw holes lined up perfectly. Even the cables to the fan that I had broken (pulled instead of lifted). My system has officially gone from 2.3 GHz > 2.6 GHz, USB 2 > 3, bluetooth 2.1 > 4, Radeon 6750M > GeForce 650M, etc, etc. Not mentioning the previous upgrades I had done to the RAM (16GB) and the hard drive(s) [1TB Hybrid in the SuperDrive bay and a 120GB SSD in the main bay]. So YES, it is totally possible to interchange the unibody logic boards if you are so inclined. I don't think anything in my system (aside from the magsafe adapter, battery, speaker, and display) is the same as when I first purchased it.



Definitely cheaper than purchasing an altogether new system and the upgrade/repairability factor of my unibody (A1826) makes me think I'll have it around for a while longer. When I get better (I recently had jaw surgery so I can barely talk) I may even make a video about my experience as I'm surprised there aren't any on youtube already.

Status:

open

Bewerkt door: Brad S ,

Tekst:

I recently had a logic board accident with my Early 2011 MBP a1286 (my bad) but was thinking of replacing it with a Mid-2012 (non-Retina) board for the CPU/GPU boost (I'm a gamer and a Mac user... figure that one out) as well as the USB 3 ports.
 
I found a decent deal online but for the life of me I can't find the opinions of anyone who's ever tried it. The iFixit teardowns and logic board replacement guides for both models (2011/2012) seem identical along with all of the tech specs about the wattage/voltage/etc. but the only opinion I've heard is from a repair shop guy on e-bay who says the upgrade wouldn't work (but I think he's just trying to sell me his repair services).
 
I'm actually amazed that there isn't more information about this kind of thing on the internet (with all the menial stuff like hacking your xbox and tricking out your iphone). For the life of me, I can't see why this 'upgrade' wouldn't work, and you guys have instilled some modicum of confidence in me so since the shop I'm buying from has a money-back guarantee I think I'm going to try it. I'll try to make a video (since there seem to be none concerning this) about it to document my failure/success.
 
Wish me luck!!
 
Edit: Placed my order for a logic board but I'm still a bit worried so I got board (hehe) and decided to see if there were any significant differences I should worry about. This is an overlay of the two boards using photos of the iFixIt teardowns (with a grain-extract filter thanks to Gimp) and there seems to be no real connection issues. Apologies for the slight distortion, I imagine the photographer was at a slightly different angle when he/she took the photos:[image|318091]

Status:

open

Origineel bericht door: Brad S ,

Tekst:

I recently had a logic board accident with my Early 2011 MBP a1286 (my bad) but was thinking of replacing it with a Mid-2012 (non-Retina) board for the CPU/GPU boost (I'm a gamer and a Mac user... figure that one out) as well as the USB 3 ports.

I found a decent deal online but for the life of me I can't find the opinions of anyone who's ever tried it.  The iFixit teardowns and logic board replacement guides for both models (2011/2012) seem identical along with all of the tech specs about the wattage/voltage/etc. but the only opinion I've heard is from a repair shop guy on e-bay who says the upgrade wouldn't work (but I think he's just trying to sell me his repair services).

I'm actually amazed that there isn't more information about this kind of thing on the internet (with all the menial stuff like hacking your xbox and tricking out your iphone).  For the life of me, I can't see why this 'upgrade' wouldn't work, and you guys have instilled some modicum of confidence in me so since the shop I'm buying from has a money-back guarantee I think I'm going to try it.  I'll try to make a video (since there seem to be none concerning this) about it to document my failure/success.

Wish me luck!!

Status:

open