Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: oldturkey03 ,

Tekst:

lyleg, is the image I attached a representation of what you are looking at?
 
[image|299858|align=center]
 
Check this and see what it shows you.
 
VIEWING THE SELF CHECK DIAGNOSTIC LIST
 
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
 
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
 
1. TV must be in standby mode. (Power off).
 
2. Press the following buttons on the Remote Commander within a second of each other:
 
DISPLAY==> Channel 5==> Volume - ==> POWER .
 
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
 
[image|299859|align=center]
 
This is what your T-con board looks like.
 
This image show what the boards do:
 
[image|299861|align=center]
 
and here is the remote with the appropriate key sequence to access the SERVICE ADJUSTMENT MODE
 
[image|299869|align=center]

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

lyleg, is the image I attached a representation of what you are looking at?
 
[image|299858|align=center]
 
Check this and see what it shows you.
 
VIEWING THE SELF CHECK DIAGNOSTIC LIST
 
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
 
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
 
1. TV must be in standby mode. (Power off).
 
2. Press the following buttons on the Remote Commander within a second of each other:
 
DISPLAY==> Channel 5==> Volume - ++>==> POWER .
DISPLAY==> Channel 5==> Volume - ++>==> POWER .
 
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
 
[image|299859|align=center]
 
This is what your T-con board looks like.
 
This image show what the boards do:
 
[image|299861|align=center]

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

lyleg, is the image I attached a representation of what you are looking at?
 
[image|299858|align=center]
 
Check this and see what it shows you.
 
VIEWING THE SELF CHECK DIAGNOSTIC LIST
 
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
 
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
 
1. TV must be in standby mode. (Power off).
 
2. Press the following buttons on the Remote Commander within a second of each other:
 
DISPLAY==> Channel 5==> Volume - ++> POWER .
 
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
 
[image|299859|align=center]
 
This is what your T-con board looks like.
 
This image show what the boards do:
 
[image|299861|align=center]

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

lyleg, is the image I attached a representation of what you are looking at?
 
[image|299858|align=center]
 
Check this and see what it shows you.
 
VIEWING THE SELF CHECK DIAGNOSTIC LIST
 
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
 
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
 
1. TV must be in standby mode. (Power off).
 
2. Press the following buttons on the Remote Commander within a second of each other:
 
DISPLAY==> Channel 5==> Volume - ++> POWER .
 
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
 
[image|299859|align=center]
 
This is what your T-con board looks like.
 
This image show what the boards do:

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

lyleg, this is actually a comment. I can not add images to a comment so I posted it as an answer for now. I can not see your additional images of the TV. Is the image I attached a representation of what you are looking at?
lyleg, this is actually a comment. I can not add images to a comment so I posted it as an answer for now. I can not see your additional images of the TV. Is the image I attached a representation of what you are looking at?
 
[image|299858|align=center]
 
Check this and see what it shows you.
 
VIEWING THE SELF CHECK DIAGNOSTIC LIST
 
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
 
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
 
1. TV must be in standby mode. (Power off).
 
2. Press the following buttons on the Remote Commander within a second of each other:
 
DISPLAY==> Channel 5==> Volume - ++> POWER .
 
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
 
[image|299859|align=center]
 
This is what your T-con board looks like.

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

lyleg, this is actually a comment. I can not add images to a comment so I posted it as an answer for now. I can not see your additional images of the TV. Is the image I attached a representation of what you are looking at?
 
[image|299858|align=center]
 
Check this and see what it shows you.
Check this and see what it shows you.
VIEWING THE SELF CHECK DIAGNOSTIC LIST
 
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
 
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
 
1. TV must be in standby mode. (Power off).
 
2. Press the following buttons on the Remote Commander within a second of each other:
 
DISPLAY==> Channel 5==> Volume - ++> POWER .
 
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
 
[image|299859|align=center]
This is what your T-con board looks like.

Status:

open

Bewerkt door: oldturkey03 ,

Tekst:

lyleg, this is actually a comment. I can not add images to a comment so I posted it as an answer for now. I can not see your additional images of the TV. Is the image I attached a representation of what you are looking at?
 
[image|299858|align=left]image|299858|align=center]

Check this and see what it shows you.
VIEWING THE SELF CHECK DIAGNOSTIC LIST
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY==> Channel 5==> Volume - ++> POWER .
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
[image|299858|align=left]image|299858|align=center]

Check this and see what it shows you.
VIEWING THE SELF CHECK DIAGNOSTIC LIST
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY==> Channel 5==> Volume - ++> POWER .
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)

Status:

open

Origineel bericht door: oldturkey03 ,

Tekst:

lyleg, this is actually a comment. I can not add images to a comment so I posted it as an answer for now. I can not see your additional images of the TV. Is the image I attached a representation of what you are looking at?

[image|299858|align=left]

Status:

open