Ga door naar hoofdinhoud
Help

Origineel bericht door: mayer ,

Tekst:

Door or Lid Latch Assembly

If the washer lid or door won't lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Door Lock Motor and Switch Assembly

If the washer lid or door won't lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Door Lock

If the door won't latch, the door lock assembly might be defective. These are normally made of plastic and cannot be repaired. If the door won't latch and the door lock is broken, replace it.

Enter your model number to see parts for your washing machine.

Main Control Board

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Status:

open