Ga door naar hoofdinhoud
Help

Origineel bericht door: skyethespy ,

Tekst:

Very difficult.Best to line it up as best as you can and put adhesive under the LCD onto the silver plate.Then set the digitizer directly on top.Make sure lcd screen is clean.Very very difficult though.If it is off it will be off on where it looks like you touch.Best to get one premised honestly.Lcd screen gets hot.So use adhesive from eBay.Two strips on LCD to the plate.Two for digitizer.Cut out additional strips for the black rubber on the outside.By the way,I got a full screen and I don't think there is glue..If you use it make sure it is good in heat :)Good luck...

Status:

open