Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: oldturkey03 ,

Tekst:

What I am trying to get at is once we know who makes the actual panel, the connectors can usually be cross referenced. For example, the 13.3" LCD panel could be a LP133WX1 which is made by LG. The connector for that panel is a DF19G-20S-1C connector.connector, widely available at places like mouser.com ( http://www.mouser.com/ProductDetail/Hirose-Connector/DF19G-20S-1C05/?qs=sGAEpiMZZMvFp%252byPHbnZY9KBzvNJ4zmj ) Here is the datasheet for that connector. Also, see if this looks familiar http://www.ebay.com/itm/New-Macbook-Pro-A1342-LCD-LED-LVDS-CABLE-CONNECTOR-30-pins-Original-US-/251154663367. Of course this is a bit of a stretch, but not impossible. The other issue here is the soldering. youYou most certainly will have to get plenty of practice before you attempt a board level repair. youYou will also have to have the right tools. May be you can find somebody that has the tools. i.e. TV-Radio electronic repair shop etc. I am not a Mac person, but I hope this helps.
What I am trying to get at is once we know who makes the actual panel, the connectors can usually be cross referenced. For example, the 13.3" LCD panel could be a LP133WX1 which is made by LG. The connector for that panel is a DF19G-20S-1C connector.connector, widely available at places like mouser.com ( http://www.mouser.com/ProductDetail/Hirose-Connector/DF19G-20S-1C05/?qs=sGAEpiMZZMvFp%252byPHbnZY9KBzvNJ4zmj ) Here is the datasheet for that connector. Also, see if this looks familiar http://www.ebay.com/itm/New-Macbook-Pro-A1342-LCD-LED-LVDS-CABLE-CONNECTOR-30-pins-Original-US-/251154663367. Of course this is a bit of a stretch, but not impossible. The other issue here is the soldering. youYou most certainly will have to get plenty of practice before you attempt a board level repair. youYou will also have to have the right tools. May be you can find somebody that has the tools. i.e. TV-Radio electronic repair shop etc. I am not a Mac person, but I hope this helps.

Status:

open

Origineel bericht door: oldturkey03 ,

Tekst:

What I am trying to get at is once we know who makes the actual panel, the connectors can usually be cross referenced. For example, the 13.3" LCD panel could be a LP133WX1 which is made by LG. The connector for that panel is a DF19G-20S-1C connector. widely available at places like mouser.com ( http://www.mouser.com/ProductDetail/Hirose-Connector/DF19G-20S-1C05/?qs=sGAEpiMZZMvFp%252byPHbnZY9KBzvNJ4zmj ) Here is the datasheet for that connector. Also, see if this looks familiar http://www.ebay.com/itm/New-Macbook-Pro-A1342-LCD-LED-LVDS-CABLE-CONNECTOR-30-pins-Original-US-/251154663367.   Of course this is a bit of a stretch, but not impossible. The other issue here is the soldering. you most certainly will have to get plenty of practice before you attempt a board level repair. you will also have to have the right tools. May be you can find somebody that has the tools. i.e. TV-Radio electronic repair shop etc. I am not a Mac person, but I hope this helps.

Status:

open