Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Craig ,

Tekst:

You will have to remove the front screen to get to the area where the sticker and foam go. The sensor can let to much light in from the backlight and cause this if the new sensor is not sealed down very well. It is not always the outside light causing this. Make sure it is plugged in good as well. You are very welcome for any info I can give.
You will have to remove the front screen to get to the area where the sticker and foam go. The sensor can let to much light in from the backlight and cause this if the new sensor is not sealed down very well. It is not always the outside light causing this. Make sure it is plugged in good as well. You are very welcome for any info I can give.

Status:

open

Origineel bericht door: Craig ,

Tekst:

You will have to remove the front screen to get to the area where the sticker and foam go.

Status:

open