iFixit - Answers With Device "Welder"

Miller Diversion 180: no power to torch

Sat, 27 Jun 2026 11:42:02 -0700

Welder powers on but when you push the pedal there is no power going to the torch and you can not here gas flowing.

Welder: Weldco SUPER PRO Wire Feed Welder

Sun, 31 May 2026 09:39:36 -0700

Does anyone have an owners/Operations Manual for the Weldco Super Pro Wire Feed Welder?

Miller Diversion 180: Why is adapter over heating

Thu, 21 May 2026 00:16:51 -0700

My welding machine it burst whenever I plug it on

Miller Diversion 180: My welding machine burst when ever I plug it on

Thu, 21 May 2026 00:13:06 -0700

My welding machine it burst when ever I plug it

Century Welder FC90 2017: Will not power up

Fri, 01 May 2026 13:42:29 -0700

It has power going to it but doesn't turn on why doesn't it turn on

Century Welder FC90 2017: My century welder popped and now don't work

Sat, 10 Jan 2026 04:59:59 -0700

i started to weld and all the sudden something in the welder popped and tripped all the circuits in my home. now it the welder don't work. i just bought it a month ago and used it once before the welder blew up.

⟐ Answered januari 10, 2026 at 4:59 MST

Welder: My sali welding machine out put not working

Mon, 27 Oct 2025 02:33:28 -0700

My sali welding machine out put not working

⟐ Commented oktober 27, 2025 at 2:33 MST

Welder: My welder won’t turn on It’s a total 200A inverter welder

Mon, 08 Sep 2025 20:01:30 -0700

How do I fix my welder that doesn’t turn on

⟐ Commented september 08, 2025 at 20:01 MST

primetech mig200 MIG welder: Mengapa mesin las mati tidak mau nyala padahal tombol powernya nyala

Sat, 21 Jun 2025 21:24:11 -0700

Mesin las mati padahal tombol powernya hidup

Why is the welding machine dead and won't turn on even though the power button is on?

The welding machine is dead even though the power button is on

⟐ Edited juni 21, 2025 at 21:24 MST

primetech mig200 MIG welder: Where do I buy one of those boards as pictured below? I ca

Wed, 14 May 2025 00:40:23 -0700

I can’t find a phine number to call.

⟐ Edited mei 14, 2025 at 0:40 MST

Plasma Cutter: Need a Service Manual for Miller Spectrum 375 (Not X-TREME)

Sun, 02 Mar 2025 03:49:15 -0700

Anyone have the service manual or Mainboard schematic for a Miller Spectrum 375 Plasma Cutter?

Specifically looking for the part number for Q6, mine is blown beyond recongnition. Thanks!

⟐ Commented maart 02, 2025 at 3:49 MST

primetech mig200 MIG welder: Layout with some values

Mon, 03 Jun 2024 06:05:34 -0700

Schweissgeraet 1

⟐ Commented juni 03, 2024 at 6:05 MST

primetech mig200 MIG welder: What is the nominal for R1 resistor?

Mon, 03 Jun 2024 03:22:46 -0700

Hi. What is the nominal for R1 resistor?

⟐ Commented juni 03, 2024 at 3:22 MST

Century Welder 125GL: Strikes a arc before I pull trigger

Tue, 05 Mar 2024 04:55:28 -0700

Strikes a arc before I pull trigger

⟐ Answer edited maart 05, 2024 at 4:55 MST

Welder: would anyone know the wiring order of a inverted 4 in one welder

Tue, 12 Sep 2023 18:11:47 -0700

https://www.amazon.com/gp/product/B0897G...

150Amp MIG Wire Welder,110V&220V AC-DC MIG&ARC&Aluminum Gas And Wire No Gas Inverter Multi-Process Welding Machine With Lcd Display Inverter Portable

⟐ Edited september 12, 2023 at 18:11 MST

Century Welder 125GL: Drive rollor not spinning

Sat, 29 Jul 2023 21:48:29 -0700

I can't figure out why my drive rollor won't spin when I pull the trigger. I pulled off the motor and tested it and the motor works as it should. The red wire going from the motor to the coil is getting power but I'm not getting power from the black wire the goes from the motor to the circuit board. Does anyone know what the problem is? Im thinking it might be the circuit board but I don't see any signed of it being bad from looking at it.

⟐ Answered juli 29, 2023 at 21:48 MST

Miller Spectrum 375 X-treme: Anyone Have a Miller 375 Plasma Cutter Service Manaul

Tue, 30 May 2023 21:58:57 -0700

Anyone have a Service / Tech. Manual or Board Schematic For a Miller 375 X-TREME Plasma? Serial Number Range: LG130001P through LG190233P

http://www.stevenrhine.com/?p=3131

⟐ Edited mei 30, 2023 at 21:58 MST

primetech mig200 MIG welder: I don't understand the 8 levels

Sun, 25 Dec 2022 18:06:43 -0700

I don't understand the 8 levels for volts and amperes. Do you have idea for calculate ?

⟐ Commented december 25, 2022 at 18:06 MST

Welder: NBC 250 inverter mig welder no spark

Tue, 04 May 2021 04:46:05 -0700

Hi all , i have an NBC250 inverter mig welder which has no spark , the fan works ok , the wire feed seems ok when i press the torch trigger just no arc ,

i have checked all the mosfets and diodes on the large heatsink (labeled on photo) ,all these check out ok ..

The only place i don’t seem to get any voltage is on this one cable which goes from the bottom board with all the mosfet / diodes , circled in red , im not sure which board should feed which and when ..

⟐ Answer edited mei 04, 2021 at 4:46 MST

Welder: Plasma cutting depth and thickness

Sun, 29 Nov 2020 18:17:18 -0700

I'm trying to open a old safe I found in a building that my company was raring down and its older safe over 350 pounds I've got a plasma cutter 60 amp it says it cuts 1 inch steel as so manybinch a hour

My question is that and will a plasma cutter cut deeper and deeper but it will make the cut slower and very ugly?

⟐ Answer edited november 29, 2020 at 18:17 MST