⟐ Answered juli 10, 2026 at 7:44 MST

sorry had nog een 2 foto gemaakt

⟐ Commented september 04, 2025 at 7:42 MST

halfvol op de lader gezet en gaat niet meer aan.

reageerd niet op aan toets. ook niet op een reset combinatie.

aansluiten op diverse laders geeft geen reactie.

geeft geen enkele keur lampje.

hoe kan ik een diagnose stellen.

vermoed een kapot moederbord, maar hoop een accu of acculader intern aansluiting.

hoe kan ik testen wat het is.

demonteren is geen probleem.

mvg

bjorn kup

⟐ Answered april 21, 2025 at 7:18 MST

Andere batterijen geprobeerd

⟐ Answered juni 16, 2024 at 0:54 MST

⟐ Answered januari 20, 2024 at 5:05 MST

Vriendelijke groet Jeroen Griever

⟐ Commented oktober 15, 2022 at 9:23 MST

⟐ Answered augustus 15, 2022 at 15:15 MST

Mijn Oculus Rift headset raakt zeer regelmatig de verbinding kwijt met de PC. Hierdoor is er bijna niks mee aan te vangen. Om het probleem te verhelpen heb ik een TP cast aangeschaft, maar ook hiermee hetzelfde probleem. Het lijkt erop dat het in de verbinding zit (hdmi ingang headset). Kan iemand mij vertellen hoe dit op te lossen of weet iemand een plek waar ik de Rift kan laten repareren. Alvast bedankt,

⟐ Answered mei 05, 2020 at 15:43 MST

⟐ Answer accepted juli 14, 2026 at 1:12 MST

⟐ Commented juni 28, 2026 at 23:26 MST

⟐ Commented juni 28, 2026 at 7:42 MST

⟐ Commented juni 16, 2026 at 16:10 MST

Thanks

⟐ Commented juni 16, 2026 at 8:48 MST

I got some wd40 to help with a stick drift issue, but some of the wd40 got onto one of the controller buttons, and now it's not responding to my input. I'm still able to press the button, but it doesn't make the same sound compared to the rest of the buttons on my controllers when i press them. It's been quiet after i heard a crunching sound when i pressed it after the wd40 i put on the joysticks was able to dry.

What do i do? Am i able to fix it, or do i need a new controller all together?

⟐ Commented juni 11, 2026 at 12:28 MST

I'm looking for some advice regarding a Meta Quest 3s repair issue.

My headset was fully functional before the repair. I replaced the left speaker bracket/assembly and also repaired a damaged USB-C port after fall damage. Since completing the repair, the headset will no longer power on or charge.

I have already tried:

• Multiple known-good USB-C cables and chargers
• Long presses of the power button (30+ seconds)
• Various button combinations involving the power button
• Testing with another known-good battery
• Checking the power button itself and its connection

The headset remains completely unresponsive:

• No charging indicator
• No LED activity
• No display activity
• No vibration or signs of life

At this point, the only thing I have left to do is start checking voltages and tracing power rails on the board.

Since the headset was working before the repair, I'm wondering if anyone has suggestions on what could have happened during the USB-C port replacement or speaker bracket replacement.

Are there any common failure points, fuses, protection circuits, damaged traces, disconnected flex cables, or components near the USB-C port that I should check first?

Additionally, I have carefully inspected all internal connections and flex cables multiple times. I found no signs of physical damage, torn cables, bent pins, improperly seated connectors, burn marks, corrosion, or damaged components. All connectors appear to be fully inserted and locked in place.

Visually, the motherboard and surrounding components look completely normal, with no obvious signs of shorts, overheating, or accidental damage during the repair process.

Any additional troubleshooting suggestions would be greatly appreciated before I start probing power rails.

Thank you.