iFixit - Answers With Device "Toy"

Toy: Fischer Price Paardje. Wie weet een oplossing voor de vervanging wiel?

Thu, 14 Nov 2024 13:28:06 -0700

Van het Fischer Price paardje van ons kleinkind Matteo zijn de twee Kunststof voorwielen aan vervanging toe door bros worden van het plastic . Ik heb mij sufgezocht naar twee vervangende wielen, maar niets gevonden wat geschikt was.

Gegevens van de wielen: diameter 114 mm. (mag iets groter tot 125 mm.) dikte/breedte van het wiel: 45 mm

Asgat: montage op een as met een dikte van 6 mm

De rode kunststof wielen zitten gemonteerd met een kunststof gele bus die op de as is geperst of mogelijk ook is gelijmd.

Matteo en ik zouden zeer geholpen zijn met een reparatieadvies.

⟐ Answered november 14, 2024 at 13:28 MST

Toy: Hoe verander ik de taal van mijn winfun olifant nummer 000695

Tue, 02 Jan 2024 12:52:40 -0700

Taal van Spaans naar Engels veranderen

Toy: Hoe kan ik de Fisher-Price Classic Platenspeler repareren?

Fri, 08 Dec 2023 15:58:37 -0700

Ik heb de 4 schroeven aan de onderkant uitgedraaid. De bovenkant komt niet los van de onderkant doordat de opwindknop dat verhindert. Hoe kan ik die opwindknop verwijderen?

⟐ Commented december 08, 2023 at 15:58 MST

Anki Cozmo: Anki Cozmo maakt geen geluid meer

Mon, 13 Dec 2021 11:50:52 -0700

Can we have the speaker replaced? We set the sound on high. So that's not the issue.

Kunnen wij de speaker laten vervangen? Het geluid hebben we op high gezet. Dus daar ligt het niet aan .

⟐ Answered december 13, 2021 at 11:50 MST

Toy: blikken speelgoed apollo capsule

Mon, 13 Dec 2021 11:37:16 -0700

Kunt u een capsulle 7 blikken speelgoed repareren ? zodat die alle functies weer kan uitoefenen

⟐ Answered december 13, 2021 at 11:37 MST

Toy: Batterijen uitgelopen van droomtelefoon

Mon, 08 Mar 2021 16:27:30 -0700

Ik heb een bordspel uit de jaren 90 en dat heet droomtelefoon. Nu zijn de batterijen uitgelopen van de telefoon zelf en het toestelletje werkt niet meer. Kan ik hier iets aan doen?

⟐ Answer edited maart 08, 2021 at 16:27 MST

Zoomer Show Pony: Wie heeft een handleiding, om het hoofd van de pony te demonteren?

Mon, 03 Aug 2020 14:43:04 -0700

Ik wil het hoofd van de zoomer show pony demonteren kan dat gemakkelijk gedaan worden, zonder dat ik iets stuk maak?

⟐ Answered augustus 03, 2020 at 14:43 MST

Red Ryder BB Gun: Where is my bb guns cereal number

Fri, 28 Aug 2026 20:17:55 -0700

where is the cereal number on a 4.5mm red ryder youth sized bb gun?

⟐ Commented augustus 28, 2026 at 20:17 MST

Toy: How to disassemble Kidoozie Funtime Tractor

Fri, 28 Aug 2026 06:37:11 -0700

I have purchased 3 of these now for the grandkids. The motor for the axle runs but there is a cog somewhere that is skipping and not letting the tractor move forward. Has anyone taken one of these apart?

Tamagotchi: Where to find replacement USB C port for Tamagotchi Uni

Mon, 24 Aug 2026 19:21:32 -0700

I have a Tamagotchi Uni I got from someone who fried the USB port with the wrong power adapter. From what I can tell the board is still fine, I just need to replace the USB port. I can't seem to find a replacement part for the USB C port though. It looks like it has 6 pins. Anyone know where to find a replacement port? I can solder the new one once I have the part.

⟐ Answered augustus 24, 2026 at 19:21 MST

Kano Computer Kit Complete: Is it possible to use the display on it as a second monitor?

Sat, 22 Aug 2026 21:53:49 -0700

I got one of these a couple years ago and would like to turn there monitor on it into a second monitor.

⟐ Commented augustus 22, 2026 at 21:53 MST

Nerf Gun: How do I fix my roughcut 2x4?

Thu, 13 Aug 2026 03:32:23 -0700

My roughcut 2x4 pump action isn't working at all and I think internals are broken too , although I am not sure

Spin Master Boxer: Lost cards/app failure

Sat, 08 Aug 2026 03:27:06 -0700

So, I tried to download a copy of the cards from the website, but it doesn't seem to exist. I also couldn't find a copy of the app anywhere. any help finding the website, or an image of the cards would be great. thx.

⟐ Commented augustus 08, 2026 at 3:27 MST

Kite: How to make a new kit

Thu, 06 Aug 2026 09:32:28 -0700

How to make new kit

⟐ Answer accepted augustus 06, 2026 at 9:32 MST

Hasbro furby 2012: Why is my furby not working? And when I shake it, somthings loose :(.

Sat, 01 Aug 2026 10:24:06 -0700

So I’ve had this furby for quite a while. Its from the crystal collection or what it called and hasn’t worked for like 2-4 years. I’ve switched batteries but that didn’t work. So please how do i fix it?

Teddy Ruxpin: My Teddy Ruxpin does not play cassettes properly, please Help!

Sat, 18 Jul 2026 09:13:09 -0700

Hi,

My Teddy Ruxpin plays the tape and moves its mouth and eyes just fine. However, when Teddy is telling the story he will not produce any sound (or very low in and out static sound) every few seconds. When I tap the volume dial or lean it against something, or just fidget with it , the sound comes back and Teddy is speaking much better. I cannot get him to tell the story audibly for more than a few seconds at a time and without my messing with the dial.

The other issue is sometimes the tape will stop and the cassette deck will open slightly and then I have to close it again.

Any advice would be appreciated.

Or, if he needs repairs I am happy to hear your referrals of places I can bring him to possibly repair these issues.

Thank you in advance for your help.

Regards,

Nicole

c/o Jack J.

⟐ Commented juli 18, 2026 at 9:13 MST

Furby: New out of box 1998 furby not talking or making sound.

Sat, 11 Jul 2026 04:08:35 -0700

Just took it out of the packaging first time ever. I put brand new batteries in it as well. It moves and wiggles but does not talk or make any noise.... what is wrong?!? do i need a new speaker?? This one has never been used....ever.... =(

⟐ Commented juli 11, 2026 at 4:08 MST

The Claw: How to open the gear box or re-thread the chain on The Claw?

Thu, 09 Jul 2026 12:12:45 -0700

I am trying to repair the chain on my 'The Claw' arcade toy because it is jammed. I have already followed the guides to remove the top cover and the internal top flange (Step 7 of the Claw Replacement guide), but I cannot see how to access the internal chain assembly or the gear box to re-thread the chain.

The chain seems to be stuck or disconnected inside the motor/gear box housing. Does anyone know how to safely open the gear box or re-thread the chain onto the internal pulleys once the top flange is removed? Any photos or tips on the internal pulley configuration would be greatly appreciated!

Furby: How can I fix for my furby does not speak?

Thu, 09 Jul 2026 02:44:14 -0700

My Furby doesn't not speak and only does the movement.

I thought that it is because of low battery.

Then I changed with new batteries.

But it still doesn't speak.

⟐ Answered juli 09, 2026 at 2:44 MST

Mr. Potato Head: Grinding sound won't move

Mon, 06 Jul 2026 05:27:34 -0700

My Toy Story Collection talking mr potato won't move his legs like it's supposed to and is making a grinding sound how to fix it

⟐ Commented juli 06, 2026 at 5:27 MST