iFixit - Answers With Device "Siemens Coffee Maker"

Siemens EQ6: Melk(schuim) doet het niet bij opstarten

Sun, 21 Dec 2025 14:32:35 -0700

Mijn machine geeft als ik hem aanzet geen melkschuim. Ik moet eerst 2-3 keer melkschuimvragen voordat er daadwerkelijk melk komt. 1e keer komen er alleen wat druppeltjes water. Bij een 2e keer melkschuim vragen begint hij naast waterdruppeltjes voorzichtig wat stoom te geven, bij de 3e keer komt er steeds meer stoom, gaat hij daarna wat melk sputteren en dan uiteindelijk komen er normale stralen melkschuim. Dus uiteindelijk gaat hij het wel doen. Als ik het apparaat aanzet en een paar uur wacht dan dan geeft hij soms wel direkt melk. Wat kan er mis/kapot zijn?

⟐ Commented december 21, 2025 at 14:32 MST

Siemens Surpresso Compact: Geen koffie uit uitlooppijpje

Sun, 24 Nov 2024 08:25:16 -0700

Het apparaat doorloopt de 'normale' procedure (maalt bonen, pakt water en lijkt koffie te zetten) maar geeft geen koffie uit de uitloop. De gemalen koffiebonen worden opgevangen maar het (meeste) water loopt uit de machine en in de opvangbak. De uitloop heb ik inmiddels schoongemaakt en zit niet verstopt.

⟐ Commented november 24, 2024 at 8:25 MST

Siemens EQ.5: mijn machine geeft geen water wel gemalen koffiebonen

Sun, 15 Feb 2026 01:50:23 -0700

wanneer ik koffie wil maken maalt de machine wel de bonen, ik hoor het water verwarmen maar dan druk en geen water. Machine geeft opmerking uit[gifte geannuleerd even wachten aub zie bijgevoegde foto

⟐ Answered februari 15, 2026 at 1:50 MST

Siemens EQ.5: Geen water door de z groep

Thu, 15 Jan 2026 01:14:55 -0700

Hallo,

Er stroomt water direct via de bypass de lekbak in. Ik heb het apparaat open gehad en alles schoongemaakt. Waar in het nu nog aan liggen?

ook dit vond ik in de lekbak.

Iemand die mij kan helpen?

foto van het apparaat

⟐ Answer edited januari 15, 2026 at 1:14 MST

Siemens EQ6: Waterreservoir lekt bij afdichting

Sat, 15 Nov 2025 00:17:26 -0700

Bij het waterreservoir lekt de afdichting, hoe kan ik die vervangen?

⟐ Answer edited november 15, 2025 at 0:17 MST

Siemens EQ.5: de LED's knipperen

Thu, 14 May 2026 06:39:58 -0700

Alle 6 LED's knipperen. Blijft zo na uit, even wachten en weer aan zetten.

Siemens EQ6: hoe ziet het patroon van de schroeven eruit bij openmaken van de afdek

Mon, 20 May 2024 04:06:11 -0700

heb mijn apparaat geopend maar houd nu schroeven over . ik zie of weet niet waar ze moeten

Siemens Surpresso Compact: Bean+ and s button blinking in alternation

Mon, 08 Nov 2021 05:46:42 -0700

My machine broke a few days ago, water was running through instead of coffee, despite it still grinding the beans. So it seems something is wrong with the brewing unit. I tried taking it apart (with help of all the great guides on here) and checked the drainage valve, cleaned the machine and took the brewing unit out and ran cold water through it. Nothing seems to have helped and now when I plug it in, the ‘bean+’ button and ‘s’ button blink in alternation and it doesn’t react to me pressing any button. I noticed that I couldn’t really seem to click the brewing unit properly into place (although I lock the handle, I can still pull it out). Do I have to connect the brewing unit to the water supply somehow? Many thanks for the help!

⟐ Answered november 08, 2021 at 5:46 MST

Siemens Surpresso Compact: outlet valve on my TK52001 / 02.

Fri, 06 Feb 2026 16:21:01 -0700

I have replaced the outlet valve on my TK52001 / 02. Unfortunately, I got it turned in the wrong direction. I've turned it right now, but no coffee will come out. What could be the problem?

⟐ Commented februari 06, 2026 at 16:21 MST

Siemens Surpresso Compact: Error1 & outlet valve leaks

Fri, 06 Feb 2026 16:18:29 -0700

Hello,

First, thank you for the clear tutorial on supporting the circular economy.

My 15-year-old Surpresso is showing "Error 1." Could you help me fix this issue?
Since the outlet valve was leaking, I cleaned it and replaced it with a new one. However, I am still experiencing a leak from the outlet valve. What would you recommend?

Thanks,
Tonny

⟐ Commented februari 06, 2026 at 16:18 MST

Siemens EQ Series: Don’t know where to put the piece that fell out of the brewing unit

Sat, 04 Oct 2025 11:01:56 -0700

I have the EQ6 Plus s700.. A piece fell out of the brewing unit when I was cleaning it. It is broken but I think it can be repaired. I just don't know where to put it back. Can you help me with this?

⟐ Commented oktober 04, 2025 at 11:01 MST

Siemens Surpresso Compact: No coffee is coming out.

Sun, 15 Oct 2023 07:27:12 -0700

Hello. I had a problem with machine, because no coffee came out into cup. It all went straight to drawer. I replaced my drainage ventil with new one but the problem remains. Do you have any idea what could be a reason? Thanks in advance,Dejan

Siemens EQ6: Siemens EQ 6 grinder issue

Thu, 29 Jan 2026 06:39:49 -0700

Why my grinder goes on continuously as soon my I put on the machine ?

⟐ Answered januari 29, 2026 at 6:39 MST

Siemens EQ.5: How take out the engine that drive the brew group

Sat, 08 Nov 2025 12:47:54 -0700

on my machine i can't put the brew group in place because the motor direction is wrong and i can't touch it because the machine doesn't want to start probably i have to repair the engine

⟐ Commented november 08, 2025 at 12:47 MST

Siemens EQ.5: Hello. I have a issue with push/pull milk frother.

Mon, 13 Oct 2025 05:17:57 -0700

This issue is coverd in this video https://youtu.be/lrDo1zG3hd8?si=YzY22KA2...
Water is room temp, no stem.

⟐ Commented oktober 13, 2025 at 5:17 MST

Siemens EQ6: Milk frothing problem with Siemens EQ.6 Plus s100

Mon, 22 Sep 2025 11:28:22 -0700

Hi all,

My Siemens EQ.6 Plus s100's milk frother system suddenly stopped working properly and I cannot find my answer elsewhere online. I've tried a couple of things but it has not yet solved it so any further tips would be much appreciated!

Some points:

The milk is being sucked up into the tube, but nothing comes out
I clean the machine weekly and I've ran a cleaning cycle as well as multiple milk system cleaning cycles. When I clean the machine I also take off the cap at the front and the two plastic parts where the milk and coffee are being dispersed from
The same milk is being used as always
The tube I've bought a couple of weeks ago and is fine (no leaks)

Any help would be much appreciated!

⟐ Commented september 22, 2025 at 11:28 MST

Siemens EQ6: How to service this machine?

Tue, 13 Aug 2024 21:11:57 -0700

Does anyone have a step by step guide on how to service this machine?

⟐ Answer edited augustus 13, 2024 at 21:11 MST

Siemens EQ6: My grinder motor burned stuck. New motor assembly installed not workin

Sat, 11 Apr 2026 07:15:53 -0700

My grinder got stuck and burned out. I can see from outside the motor all the wires burned inside. I bought a new motor assembly (with cables and everything) and did a swap. Now new grinder does not move at all , The machine does full coffee preparing process but only water comes out.

Can this be the same mosfet burnt that makes the grinder run forever or should i look for something else?

Siemens Coffee Maker: Touch Display not working on Siemens EQ500

Thu, 09 Apr 2026 08:28:26 -0700

Hello

Only the on/off button works on my touch display on Siemens EQ500. Any idea how to fix it?

Siemens EQ6: Siemens EQ.6 Plus dead after power cycle (Error: Restart Machine)

Tue, 27 Jan 2026 12:12:00 -0700

Siemens EQ.6 Plus won't turn on after "Restart" message Message: "My Siemens EQ.6 Plus displayed a message asking to restart the machine. I unplugged it from the wall and plugged it back in, but now it won't turn on at all. The screen is black and there are no lights. Does anyone know how to fix this?