iFixit - Answers With Device "Saeco Coffee Maker"

Saeco Xelsis and GranAroma: Geen koffie enkel water

Mon, 26 Jan 2026 12:41:33 -0700

Eerst had ik het probleem dat er geen water door kwam bij het opzetten van de machine (spoelen), na het skippen van deze cyclus opgemerkt dat ik enkel warm water kan nemen, bij de rest probeert deze wel maar komt er niets uit. De ventielen nagekeken en zitten allemaal vrij, als ze voeding krijgen worden deze mooi getrokken. Na wat zoeken uitgekomen op de pomp die mogelijk stuk is, deze intussen vervangen. Nu kan de machine wel terug spoelen bij de opstart maar als ik koffie kies komt er enkel water uit. Wel opgemerkt dat er een rode led pinkt op de grote printplaat. Tijdens het zetten van de koffie eens gemeten op de ventielen maar hier krijg ik nergens voeding toe? Zou er dan iets zijn met de printplaat? Kan iemand mij hiermee verder helpen?

⟐ Commented januari 26, 2026 at 12:41 MST

Saeco Coffee Maker: Mijn saeco granaroma geeft steeds na 2 kopjes voeg water toe

Tue, 16 Dec 2025 02:11:17 -0700

Na 2 kopjes koffie elke keer voeg water toe zit genoeg water in moet hem uitzetten en na een kwartier kan ik dan weer koffie pakken 2 kopjes heb het filter al 2x vervangen en ook zonder filter zelfde resultaat

⟐ Answered december 16, 2025 at 2:11 MST

Saeco Coffee Maker: Mijn apparaat , Saeco LIRIKA , heeft geen spanning (stroom)

Thu, 25 Sep 2025 00:59:54 -0700

als ik het apparaat aanzet gebeurt er niets. De controle lampjes gaan niet aan

⟐ Answered september 25, 2025 at 0:59 MST

Saeco Coffee Maker: Saeco exprelia evo lekt water

Sun, 25 Nov 2018 02:16:17 -0700

Saeco 3xprelia evo lekt water. Aan de linkerzijde van het toestel zitten twee onderdelen die de oorzaak zijn: een zwart en een wit, verbonden met elkaar. Het wit heeft ook wat roest. Hoe los ik dit op, welke onderdelen zijn dit?

Starbucks Barista: No water out of the brew head

Sun, 30 Nov 2025 07:47:28 -0700

I have descaled 2x, and cleaned the brew head and portofilter screens, but water no longer comes down thru the brewhead. Water comes out of the steam wand, and steam comes out of the wand too. No problems there. I think what is happening is that the pump is not engaging. I don't hear that customary kick in sound I usually hear when the pump goes on. What do you think my problem is? Is this something I can fix myself? Thanks for your help. I really like this machine!

⟐ Answered november 30, 2025 at 7:47 MST

Starbucks Barista: Machine has lost its prime

Mon, 13 Oct 2025 07:28:45 -0700

lost prime on pump. Machine sat for a while not being used. Doesn't flow water thru..

⟐ Commented oktober 13, 2025 at 7:28 MST

Starbucks Barista: Steam wand leaking. Not enough pressure for a good shot!

Thu, 10 Nov 2022 17:10:06 -0700

I'm not able to fully close down the steam wand. So, when the machine builds pressure to steam milk - or to pull a shot - the steam wand leaks and releases pressure. My machine is only a couple of years old, but this problem has been getting worse to the point that it's nearly unusable. The espresso I can make with this problem ranges from so-so to undrinkable.

⟐ Commented november 10, 2022 at 17:10 MST

Starbucks Barista: Pump seems to be working, but no shot coming through portafilter.

Thu, 21 Aug 2025 20:47:35 -0700

We've had our Starbucks Barista for years and have used it regularly. Awesome machine. Recently though, we can't get a shot to pull. The pump sounds normal, so, we hear the pump push water into the portafilter, but then, the "swoosh" sound of when the pressure pushes the shot out never comes. Sometimes, water leaks around the portafilter, but most of the time, nothing comes out. When I release the portafilter, it either splats everywhere, but most of the time it is just water and grounds, or just wet grounds. I cleaned the portafilter as recommended on your site and reassembled, but this did not help. I also descaled the machine, and when I did this, I pulled a lot of water & solution through both the wand and the shower head, so I think the pump is ok. But, this did not help either. Any ideas?

⟐ Commented augustus 21, 2025 at 20:47 MST

Starbucks Barista: No water from the brew head!

Sun, 21 Jun 2020 07:37:14 -0700

I have seen a few posts on this, but looking for help to determine if this is a pump issue. I get water and steam from the wand, the unit heats the water fine, and buttons are all working ok. It primes fine, but no water comes through, even when I remove the portafilter or even if it in place but with no coffee. I removed the screw and checked the filter screen, all clear. I hear a faint pump sound when trying to brew, but not the signature sound that it usually gives when you know the water is on the way. Any help is appreciated.

Steve

⟐ Commented juni 21, 2020 at 7:37 MST

Starbucks Barista: Brew head (portafilter) assembly instructions

Sun, 05 Mar 2023 19:32:04 -0700

I have a Starbucks Barista espresso maker and I took apart the portafilter (I think it is model 226550650 made by Saeco) to clean it but while doing so the tiny wire spring inside came off. I need assembly instructions in order to put it back together properly.

⟐ Commented maart 05, 2023 at 19:32 MST

Starbucks Barista: Can't get my machine to prime

Tue, 28 Dec 2010 18:14:13 -0700

I haven't used the machine that often, the last time I tried to prime it the motor goes but does not draw up the water, maybe an air pocket in the line?

⟐ Marked as duplicate december 28, 2010 at 18:14 MST

Starbucks Barista: Pump works, briefly, then gets quieter, doesn't pump

Fri, 16 May 2025 23:35:12 -0700

When I start to pull a shot, everything sounds normal, works normally. Then the pump gets very quiet and stops pushing water through the coffee. To me it seems as if a valve gets shut, but the pump is still trying to pump. If I turn it off, then on again, it works briefly, then gets backed up (or loses pressure?) again.

It works fine without the Portafilter in place. It works with an empty PF - but it leaks out the top so much that the pump isn't really being challenged.

All screens are clean, and I've tried single shot pods (my norm) and double shot with Starbucks ground espresso, loosely tamped.

Thanks for your help!!

⟐ Answered mei 16, 2025 at 23:35 MST

Starbucks Barista: Barista machine won't start

Sat, 11 Apr 2020 04:17:07 -0700

My machine was over heating when I started it. Now it won't start at all. Any suggestions?

⟐ Answered april 11, 2020 at 4:17 MST

Starbucks Barista: Groupdhead, where my portafilter fits leaks badly when brewing.

Wed, 15 Jan 2025 11:54:27 -0700

First of all...I did read a post from someone having a similiar problem. But what happened to me is a partial piece of black plastic came out of the Grouphead area some years ago...since then I have continued to brew...but have leakage. Sometimes minimal and sometimes a lot. But I tend to still get a shot. (albeit messy). I found your great site but I wonder if I have to go thru the top of the Barista to fix this (looks daunting) or can I go into the grouphead area and fix from there? I have the SIN006 but it is an older model...serial number is 122643. Thanks for any help u can afford me. Kind regards. Vince

⟐ Commented januari 15, 2025 at 11:54 MST

Saeco Intelia HD8752: Why is my machine leaking water. Why does it shut off

Wed, 09 Mar 2022 17:56:29 -0700

my machine leaks underneath, I can't find where the leak is coming from. I have cleaned it through and through, still leaks.

Today, it just shut down. Would not come on.

⟐ Commented maart 09, 2022 at 17:56 MST

Starbucks Barista: The brew head leaks whenever the machine is on?

Thu, 13 Jan 2022 02:44:53 -0700

My machine worked fine and then was inactive for about a year. (Not exposed to extreme temperatures. The machine still works but the brew head leaks a lot of water.

⟐ Commented januari 13, 2022 at 2:44 MST

Starbucks Barista: My barista shorts out the GFI switch!

Tue, 07 Mar 2023 19:04:05 -0700

Hello,

We've had this GREAT machine for a long time. A (very long espresso-less) month ago, we plugged the machine in and pressed the on button and the GFI switch on the wall blew. I'm assuming it is a fuse - perhaps associated with the heating element. Any suggestions?

Much thanks,

BMA

⟐ Commented maart 07, 2023 at 19:04 MST

Starbucks Barista: Ready light does not come on

Wed, 22 Sep 2021 18:04:03 -0700

The Ready light does not come on anymore. The water does not get hot. The pump does work. Water does come out of the steam dispenser & brew head. I did feel the brew head & it was slightly warm, but never got hot & the ready light never came on after 10- 15 minutes.

⟐ Commented september 22, 2021 at 18:04 MST

Saeco Coffee Maker: What causes the lack of steam pressure of my espresso Saeco machine?

Mon, 08 Jan 2024 14:00:52 -0700

Hi, I have a 5 years Via Venezia that pours excellent espresso shots. I’ve been having a problem with my steam pressure since a month or two. Although I descaled the boiler with the Saeco formula several times, it seems there is a lack of pressure in the steam wand. I’m able to heat the milk after 2 minutes, but I can’t get a nice steam flow and I’m not able to make the milk swirl anymore (so the milk just stands there and gets heated). It feels like the steam jet is just not strong enough. Again, strong descaling did not improve. I confirm that in the past, descaling was always working. Now it does not improve my steaming. I’m now considering a problem with the heat sensor. Could it be that the water does not turn all into steam completely? Thanks!

⟐ Commented januari 08, 2024 at 14:00 MST

Starbucks Barista: No water from steam wand

Mon, 25 Jul 2016 11:38:46 -0700

The steam wand doesn't let out any water for priming or steam. I've soaked the wand in vinegar over night but it still doesn't allow steam or water out. Any ideas?

⟐ Answer accepted juli 25, 2016 at 11:38 MST