iFixit - Active Questions With Device "Nespresso"

Krups Nespresso XN 2140: Máquina avariada não deita café

Sun, 19 Apr 2026 09:14:50 -0700

Nespresso avariada

Nespresso CitiZ: Magimix Citiz gaat niet meer aan

Sat, 20 Dec 2025 03:46:45 -0700

Hoi, mijn magimix met ref 11 290 m 190 stond al lang (jaren) niets te doen. IK besloot hem weg te geven maar hij blijkt niet meer aan te gaan.

Is dit een bekend probleem, en zou het makkelijk op te lossen zijn? Zonde om zo weg te gooien...

Alvast dank voor de reactie, Mieke

Ik heb de machine opengemaakt, hierbij een foto. De printplaat zit nog verder weg denk ik?

Dit is de printplaat, maar ik herken geen microswitches, maar dat zal aan mij liggen

De bovenkap is er helemaal af, dat is alleen plastic zonder onderdelen.

De koffieknop is een klein printplaatje met een lampje, ik zie geen switches

Bovenin de machine ontdek ik geen printplaten meer, zie bijgevoegde foto's.

Bij de ene foto ligt de kap er los op, bij de andere foto houd ik hem op z'n kop ernaast

⟐ Answer edited december 20, 2025 at 3:46 MST

Nespresso CitiZ: Lungo knop geeft te weinig water

Sat, 11 Oct 2025 15:31:08 -0700

Ik heb alles al uitgeprobeerd van ontkalken tot fabrieksimstelling maar hij blijft weinig water geven.Wat kan ik hier aan doen?

⟐ Answered oktober 11, 2025 at 15:31 MST

Nespresso: Waarom lekt beluchter overdruk ventiel

Thu, 21 Aug 2025 00:58:11 -0700

Overdruk ventiel lekt

⟐ Answered augustus 21, 2025 at 0:58 MST

Nespresso Pixie Repair: Druk beveiliging lekt water

Tue, 19 Aug 2025 00:45:24 -0700

Hoe los ik de lekkage druk beveiliging op

⟐ Answered augustus 19, 2025 at 0:45 MST

Nespresso Delonghi Lattissima Touch: Hoe de afsluitring in de cuphouder vervangeb?

Wed, 25 Dec 2024 13:58:12 -0700

Mijn apparaat lekt koffie voordat ie door het tuitje stroomt. We ontkalken regelmatig en maken m goed schoon. Ook alle soorten cupjes incl. Nespresso geprobeerd maar niets helpt

⟐ Answered december 25, 2024 at 13:58 MST

Nespresso: Nespresso apparaat lekt in brewer

Sat, 15 Apr 2023 23:57:34 -0700

Membraan van koffiecups doorbreekt niet bij half jaar oud, ogenschijnlijk goed functionerend nespresso koffiezetapparaat. Alle pakkingen etc nagekeken. Ook pomp lijkt bij onderzoek goed. Kan het zijn dat de pomp niet voldoende druk opbouwt?

⟐ Answered april 15, 2023 at 23:57 MST

Nespresso Vertuoline: Het licht knippert tweemaal, dan pauze, dan weer tweemaal, etc.

Mon, 14 Nov 2022 06:35:07 -0700

Hoe kan ik deze fout, waarbij het licht twee keer knippert, dan weer even uit is, en dan weer twee keer knippert oplossen zonder het toestel terug te hoeven sturen?

⟐ Answer accepted november 14, 2022 at 6:35 MST

Nespresso Delonghi Lattissima Touch: Latissima Touch - Fails to complete the descaling process

Fri, 10 Apr 2026 05:29:41 -0700

Tried to descale the machine (when prompted by the flashing light).

Descaling cycle completed, but after filling the tank with fresh water the machine switched off when the froth button was pressed to start the rinse cycle.

Tried to run the whole process three times - no change.

So can't complete the rinse and the descale light continues to flash.

Any similar experience and suggested fix out there?

Nespresso Vertuoline: Light blinking two times, pause, two times, etc.

Tue, 31 Mar 2026 11:48:26 -0700

How can I resolve the two-blink error on this machine without returning it?

⟐ Commented maart 31, 2026 at 11:48 MST

Nespresso CitiZ: Nespresso Citiz coffee machine - pump not activating

Sat, 07 Feb 2026 11:44:28 -0700

Hi,

I have a Nespresso Citiz coffee machine. It was working properly and in daily use. However, earlier this week it was descaled but during the descale process it completed the two descale stages but then it refused to do the rinse stages.

The machine has since been unplugged and the factory reset process applied.

Now when I try to use it:
I plug the machine in.
Press a button to activate it, both lights flash to show it is warming up.
After a short wait, both lights remain on to show the machine has warmed up.
A button (lungo or espresso) is pressed, it flashes and the other button light remains lit (I remember this being the pressed light remaining on and the other light goes off when it was working properly).
After a short while, the blinking light goes solid again and both lights remain lit.

There is no sound of the pump working. All the above happens in silence.

Any help very greatly appreciated.

⟐ Answered februari 07, 2026 at 11:44 MST

Nespresso: Why is my nespresso espresso watery?

Mon, 02 Feb 2026 18:49:19 -0700

I have a DeLonghi Type EN 125S Ser No 81626 S300075 Nespresso machine. the espesso comes out watery, little crema. my wife has run descaler, and cleaned it up. i read that it may be the gasket. I can't find if there should be a gasket that sits on top of the espresso pod when the chamber is closed (handle closed with pod in side). I read that there is another gasket, and youtube findings, that sits below the plastic pod holder that seals the high pressure water when the handle is closed and the spring compressed so this seal is a high/low pressure boundary. I bought a gasket, but it seems to big, not the 31.5 mm ID that it seems the other one are. (1) should there be a gasket that sits on top of the capsule (2) if so, where can I order replacement (3) provide help on the "other" gasket under the pod plastic chamber, if that could be the problem, and where to buy. Thanks for the help!

Nespresso CitiZ: Nespresso CitiZ coffee machine, some water is leaking into collection

Sun, 25 Jan 2026 12:55:21 -0700

I have a Nespresso CitiZ coffee machine and some water is leaking into the collection tray without passing through the coffee pod. I assume that an internal seal has worn out. How easy is to renew the seal and from where can it be sourced?

⟐ Commented januari 25, 2026 at 12:55 MST

Nespresso: Descaling problem with Vertuo Plus

Tue, 09 Dec 2025 14:03:54 -0700

The orange/green light came on which means my Vertuo Plus needed descaling. I have done this several time before but this time after the whole descaling cycle was finished, the orange/green light came on again. Any ideas? Do I need to descale it again?

Nespresso Pixie Repair: Where does this piece go!

Fri, 05 Dec 2025 08:26:12 -0700

I followed video on how to take apart machine to clean diffuser plate, put back together and have a black plastic piece left over. Have seen others with same problem but no-one has an answer. It would make my day to know!

⟐ Commented december 05, 2025 at 8:26 MST

nespresso lattis: Brew unit - mouting pieces

Fri, 05 Dec 2025 08:20:20 -0700

I've just cleaned my Nespresso but during drying process, two pieces has been removed from brew unit. I'm sure that the little plastic pipe is from the brew unit but have a doubt about the little black plastic piece with the copper spring.

Does anyone knows how to mount these pieces into the brew unit please ?

As you can see here, the brew unit piece (I've unmounted all the parts after the pieces came out of here) and the two little pieces

And here is the hole where the one or two pieces came from

⟐ Answered december 05, 2025 at 8:20 MST

Nespresso inissia: Machine not piercing the capsule—water leaks out the back

Fri, 05 Dec 2025 08:05:17 -0700

Hello, After placing the coffee capsule and firmly closing the capsule compartment (capsule holder), I activate the machine. The water is pumped, but it escapes behind the capsule into the used capsule container (capsule bin). I open the compartment and see that the capsule has not been pierced—neither from the front nor the back. What could be the cause of this issue?

⟐ Answered december 05, 2025 at 8:05 MST

Nespresso inissia: My machine still makes coffee but water leaks out. How can I fix it?

Fri, 05 Dec 2025 08:01:17 -0700

My machine still makes coffee, but lots of water leaks through at the same time, I have to put a tray underneath to collect it. How can I fix that myself?

⟐ Answered december 05, 2025 at 8:01 MST

Nespresso VertuoPlus Deluxe: find a water leak

Tue, 04 Nov 2025 05:01:44 -0700

water appears under the coffee machine after a few hours, even though the coffee machine is turned off

⟐ Edited by author november 04, 2025 at 5:01 MST

Nespresso inissia: Pump is not starting.

Mon, 20 Oct 2025 09:14:04 -0700

Breville Inissia. Lights flash and then steady. Press button and lights flash (like normal cycle, water heats) but the pump never starts (no noise) then buttons stop flashing, like brew has completed. Have tried priming, but think that it is something else, as there is no pump noise.

⟐ Answered oktober 20, 2025 at 9:14 MST