iFixit - Answers With Device "Microsoft TV Console"

Xbox: elektrische schema van de Xbox original

Mon, 08 Nov 2021 02:31:00 -0700

Beste heer/mevrouw,

Ik ben op zoek naar een elektrische schema van de Xbox original. Heeft u een schema of weet u misschien waar ik deze schema kan vinden ?

Graag hoor ik van u.

⟐ Answered november 08, 2021 at 2:31 MST

Xbox One: How to disassemble the trigger axis which holds the spring?

Thu, 11 Oct 2018 10:46:29 -0700

The axis appears to be clamped, I put some force on both sides but it won’t give, afraid I might damage the controller.

⟐ Edited by author oktober 11, 2018 at 10:46 MST

Xbox: mijn xbox wil niet starten. wat moet ik doen?

Tue, 24 Jul 2018 10:08:30 -0700

een jaar geleden heb ik een originele xbox gekocht. hij deed het perfect zonder problemen. maar vandaag (nadat ik hem 2 weken geleden nog gebruikt heb) wou hij niet meer starten. ikzelf heb het idee dat het komt vanwege dat de startkabel gevouwen heeft gelegen. maar zijn er nog andere oorzaken?

alvast met vele dank ,

Thiemo heijnen

⟐ Reopened juli 24, 2018 at 10:08 MST

Xbox: mijn xbox start niet op. wat moet ik doen?

Tue, 24 Jul 2018 10:11:49 -0700

a year ago I bought an original xbox. he did it perfectly without problems. but today (after I used it 2 weeks ago) he did not want to start anymore. I have the idea that it is because the starter cable has been folded. but are there other causes?

can you send the password to my email address?

with many thanks, Thiemo Heijnen

⟐ Edited juli 24, 2018 at 10:11 MST

Xbox 360 S: heb een error 81 +een rood licht van voor op de console

Fri, 18 Sep 2015 22:07:16 -0700

heb een een error 81 en mijn tv staat geschreven dat ik system custumor service moet contackteren en van onder aan het scherm ,staat int groot ERROR 81.en op de console van voor is het lichtje dat normaal groen is rood.kan iemand me uit de brand helpen alvast mercikes David.

⟐ Commented september 18, 2015 at 22:07 MST

Xbox One S: How do I fix my broken xbox one S sync button?

Sat, 16 May 2026 16:56:28 -0700

Okay so i figured out around two days ago i tried syncing my controller to me xbox one S but it wouldnt work i pressed the sync button on my xbox and i couldnt hear a click sound it makes normally when you sync a controller is a peice missing or is my sync button broken?

⟐ Commented mei 16, 2026 at 16:56 MST

Xbox 360: How to install games on my xbox360

Sat, 16 May 2026 11:46:17 -0700

How to install games on my xbox360

⟐ Answered mei 16, 2026 at 11:46 MST

Xbox 360 S: Will a xbox one power supply work on xbox 360 slim

Sat, 16 May 2026 10:20:11 -0700

I bought a xbox 360 slim from a guy. He showed that it worked, but I bought it withought the power supply. A power supply from a xbox one looks like the same. Will a xbox one power supply work on a xbox slim. They both have the 2 large pins for the plug and look the same, but I thought I would ask before i tried it.

⟐ Commented mei 16, 2026 at 10:20 MST

Xbox: Help identifying power supply components

Thu, 14 May 2026 20:21:44 -0700

This is a 1,0 model original XBox using a Foxlink FTPS-0001 Rev B power supply.

I've been casually attempting to repair this XBox for a few months now and I think I finally found the culprit. One of the glue blobs on the power supply hiding underneath one of the heatsinks was rather discolored, and after cutting it open I found these two little guys at positions C5 and R6. The board itself was also discolored underneath. I can't find a schematic for the power supply so I'm asking here as a gut check.

C5 - This is the ceramic capacitor to the left, I believe this is the part that has failed as the pad on the bottom of the board showed some corrosion and started to lift. Testing on a multimeter shows no results. Markings lead me to believe the values are 2.2 nF, 1000V, +-20%.

R6 - This is the resistor to the right, whatever happened under the glue discolored it so the bands are not totally clear. Testing it returns 21,640ohm, 3V but that doesn't seem right so I'm assuming this then failed with the capacitor. My research says this should be 39ohm +-5%, but my eyes see red/black/brown/gold which would would put it at 200ohm +-5%. However, if it is red/brown/orange/gold then my testing was actually correct and put it at 21,000ohm +-5%. Really at a loss here.

Am I on the right track here and are any of my values correct? Is there anything else I should probably test on the supply while I'm at it?

⟐ Answered mei 14, 2026 at 20:21 MST

Xbox Series X: How to factory reset my xbox

Tue, 12 May 2026 02:14:37 -0700

how do i factory reset my xbox

⟐ Answered mei 12, 2026 at 2:14 MST

Xbox 360 S: I have red dot of death

Mon, 11 May 2026 07:17:04 -0700

I replaced the thermal paste on it couple days ago, when i have it fully assembled the console gets the red dot of death, but when i take it out the casing it self and try to boot it up outside its shell it works. has anyone experienced that?

⟐ Commented mei 11, 2026 at 7:17 MST

Xbox One S: My controller wont stay connected after unplugging from wire

Sun, 10 May 2026 08:52:03 -0700

I have tried everything ive found the past 3 days i opened up cleaned it out, replaced both the rf board and wifi module ,i entered troubleshoot mode and did an offline update via usb ,and ive reset it twice. The controllers work when theyre wired in but the second its unplugged it disconnects .I press the sync button but it doesnt flash on the console and when u go to settings and try to connect a controller it doesnt work either. PLZ HELP. the first 4 images are of the new and old rf boards the last is on the motherboard where it connects

⟐ Commented mei 10, 2026 at 8:52 MST

Xbox Series X: On/Off Beep. Shorts around APU test points

Sat, 02 May 2026 15:58:04 -0700

I have an xbox series x that does not power on. It started as an HDMI repair with ripped traces and snowballed into something worse. I cannot get it to come on. I ordered a raspberrypi pico to flash this firmware (https://github.com/xboxoneresearch/PicoD...) and get the whatever POST code it was throwing.

The result was SMC (1): E006 [SMC_FATAL_CPUGFX] Low priority: VREG_PWRGPAB_CPUGFX_PWRGD missing/timout: Check shorts on V_DRAM1P8, V_SOC1P8, V_SOCPHY. U681, U7, U129, U57 and U480 drive this signal low when a fault is detected.

I checked those test points and got no shorts. I did get shorts on the V_GFXCORE, V_CPUCORE, V_MEMPHY, V_SOC test points though.

I am at a loss as to what could be the issue here. Can anyone guide me in the right direction?

⟐ Commented mei 02, 2026 at 15:58 MST

Xbox Series X: XBOX series x Turns of after 1-2 seconds

Fri, 01 May 2026 15:16:45 -0700

The xbox logo turns white, the turn on sound is here, then 1-2 seconds later a click sound from inside is heard and the console shuts down. My guess was faulty PSU so i changed it but no difference from before.

What else could it be?

⟐ Answered mei 01, 2026 at 15:16 MST

Xbox Series X: I don't know the model name of the model that won't power on.

Mon, 27 Apr 2026 03:03:25 -0700

It's a 1TB model, but the sticker on the console says

model number 1882. Is that correct?

The console won't power on, so I think the power supply is faulty.

I'm trying to buy a Microsoft Xbox Series X Disc Drive Model 1882 (14-digit serial number) Power Supply - Genuine

but the model on this site doesn't match the one I have.

⟐ Answer accepted april 27, 2026 at 3:03 MST

Xbox One: Xbox one throwing error E106 00000009 while booting

Sun, 26 Apr 2026 18:36:26 -0700

When you press the power button, it chimes, it pops up with a loading bar that gets to about 4% and then throws error E106 00000009 80070002 while trying to update using OSU 1 the update gets to 1% then throws E101 00000504 8B050041, the OS version is 26100.7815.amd64fre.xb_flt_2604ge.260414-2200. Any help would be greatly appreciated!

⟐ Commented april 26, 2026 at 18:36 MST

Xbox One X: Need help Identifying blown component on motherboard of Xbox One X

Sun, 26 Apr 2026 06:51:37 -0700

Looking for help identifying a component that looks like it had blown on my Xbox One X.
Background to my console is that it stopped displaying a signal 2 weeks ago. However, the console will power on. I have tried using different power cable, different HDMI cable, a different TV, and no success. Most symptoms, I have read, led me to believe the HDMI Retimer had failed, so I ordered a replacement chip to prep.

Yesterday was when I disassembled the console to prep for the work and that is when I discovered this component. It looks like it had blown at some point and might be why it wont display a signal.

However, I have no idea what this component is and I need help identifying what it is.

I have a macro shot of the chip, but its still hard to ID.

Its right next to the port for the front switch power button on the xbox. Here is a photo of another board of where I am talking about (circled in red):

I appreciate anyone who can help me identify this component and possibly where I can buy a new one.

Thank you

⟐ Answered april 26, 2026 at 6:51 MST

XBOX One S Military Green: Why does my xbox continuously beep and turn itself on sometimes?

Sun, 19 Apr 2026 05:52:22 -0700

While xbox is on it beeps periodically but nothing happens and after it has been turned off it will eventually turn itself back on also.

⟐ Answered april 19, 2026 at 5:52 MST

Xbox 360 S: Random freezing, restarting by itself

Sun, 19 Apr 2026 05:47:10 -0700

My xbox is freezing during gameplay, mainly at the first loading screen I come across, rarely at the dashboard and I have to unplug the power cord to shut it off. Sometimes the wifi card isn't detected as well. I can play Rainbow Six Vegas 2 for 10 minutes before it abruptly shuts on and off by itself.

I've tried cleaning and repasting it, didn't work and I can confirm temps are low. I've also reinstalled the latest update.

⟐ Commented april 19, 2026 at 5:47 MST

Xbox One: Errors E106 and E101

Fri, 17 Apr 2026 21:37:54 -0700

I get error E106 whenever I boot and when I try to update or factory reset I get E101. I used the factory update trick by holding eject and bind even after two beeps with a USB drive plugged in to instantly start updating but every time I try to update or factory reset I get error E101. When it says checking update, i checked on the drive and saw that it does move the update files to the disk but it doesn't install them. I have repartitioned the hard drive with ludvig jerabeks Linux tool. I tried every USB option available. Any ideas on what these error codes actually mean? I know E101 has something to do with updating.

Oh and I can't send it to Microsoft because my warranty period has ended and I don't want to pay half the retail price just to let them repair a known issue.

⟐ Commented april 17, 2026 at 21:37 MST