iFixit - Answers With Device "Meta VR"

Meta Quest 2: compleet dood reageerd nergens op.

Mon, 21 Apr 2025 07:18:13 -0700

quest 2 is gestopt met werken.

halfvol op de lader gezet en gaat niet meer aan.

reageerd niet op aan toets. ook niet op een reset combinatie.

aansluiten op diverse laders geeft geen reactie.

geeft geen enkele keur lampje.

hoe kan ik een diagnose stellen.

vermoed een kapot moederbord, maar hoop een accu of acculader intern aansluiting.

hoe kan ik testen wat het is.

demonteren is geen probleem.

mvg

bjorn kup

⟐ Answered april 21, 2025 at 7:18 MST

Oculus Quest: Ik heb een Kapotte rechter controller, kunnen jullie dit repareren?

Sat, 15 Oct 2022 09:23:05 -0700

Hallo ik heb een kapotte rechters controller voor een ocules quest kunnen jullie deze voor mij repareren?

Vriendelijke groet Jeroen Griever

⟐ Commented oktober 15, 2022 at 9:23 MST

Oculus Quest: Mijn oculus quest rechter controller connect niet

Mon, 15 Aug 2022 15:15:16 -0700

Mijn rechter oculus quest controller kan niet connecten

⟐ Answered augustus 15, 2022 at 15:15 MST

Oculus Rift CV1: De headset raakt zeer regelmatig de verbinding kwijt met de PC

Tue, 05 May 2020 15:43:20 -0700

Beste Allemaal,

Mijn Oculus Rift headset raakt zeer regelmatig de verbinding kwijt met de PC. Hierdoor is er bijna niks mee aan te vangen. Om het probleem te verhelpen heb ik een TP cast aangeschaft, maar ook hiermee hetzelfde probleem. Het lijkt erop dat het in de verbinding zit (hdmi ingang headset). Kan iemand mij vertellen hoe dit op te lossen of weet iemand een plek waar ik de Rift kan laten repareren. Alvast bedankt,

⟐ Answered mei 05, 2020 at 15:43 MST

Oculus Rift CV1: 1 lens doet het niet meer

Fri, 03 Aug 2018 13:43:58 -0700

mijn oculus rift is gevallen en nu zie door rechts niets mee (paar groene en zwarte strepen). Is dit nog te repareren en hoe en waar.

Oculus Quest: How do you replace the lens on the oculus quest?

Mon, 27 Apr 2026 07:53:05 -0700

If the lens shatters how do I replace it?

⟐ Answered april 27, 2026 at 7:53 MST

Oculus Quest: My oculus quest won't charge and has a red light.

Mon, 27 Apr 2026 07:26:43 -0700

My oculus quest 1 has been acting up and can’t charge. It is dead right now and when I plug it in it gives me a red light. I have now changed the cable 3 times and wait for an hour before plugging it back in to see if it was overheating. Please help me!

⟐ Commented april 27, 2026 at 7:26 MST

Meta Quest 2: My vr says no commands and wont turn on with purple light

Sat, 25 Apr 2026 10:08:44 -0700

how do i fix it or do i gotta buy a new one

⟐ Commented april 25, 2026 at 10:08 MST

Meta Quest 3: Disconnect built-in battery, What if you connect an external battery?

Thu, 16 Apr 2026 19:57:33 -0700

Disconnect the built-in battery,

If you connect an external battery,

Will it play normally?

⟐ Answer edited april 16, 2026 at 19:57 MST

Meta Quest 3S: Stuck on USB Update Mode screen

Fri, 27 Mar 2026 07:27:47 -0700

Hi, I was hoping somebody can help advise me on how to resolve my Meta Quest 3s being stuck on USB Update Mode screen, I have performed a Factory reset and followed numerous videos relating to this issue on YouTube but the device keeps looping back to the USB Update Mode screen and I am unable to get passed it?

Thank you in advance

Meta Quest 3S: How to fix a meta 3S with no command and factory reset isn't working

Sun, 22 Mar 2026 10:57:56 -0700

It won't work

Meta Quest 3: What part(s) to replace?

Mon, 16 Mar 2026 12:04:04 -0700

On my third Quest 3 in 2 years 3 months. Replaced by Meta. They’ve all failed similarly in that they are working as expected, put on a charger and show boundary or tracking issues on next use. Software reinstall and factory restore either don’t solve the issue or brick the unit.

Current unit followed same flow except I’ve been able to get it partially working but not usable after multiple restores and software reinstalls.

it will boot but shows Finding Position in Room. Then without interaction it will show the menu bar at the bottoms, then flash back to Finding Position. Pass through works intermittently. When it does work the room has waves, jumps between zoomed to unzoomed views, sections of the room to sides flash in front of me, the view has fractures in it, there are what are best described as lightening bolts across the screen with combined views of what’s in front of me and to the sides. Menus, if I can get them to come up, slide in and out of view or change distances and positions, controller functionality is intermittent…the list goes on. I’m sometimes able to get it stable enough or click fast enough to get to some menu choices so have cleared and tried to reset the boundaries although redraw may not have completed. No experimental features are on so “lie down” is not enabled but I’ve been able to reset the experimental features (none were enabled)

No external damage to any of the cameras. The device has never been dropped. If i try long enough to work through menus the top front gets very warm/hot which I think is where the heat sink is located.

Is this all due to a failed tracking sensor? Bad mb? Both?

⟐ Answered maart 16, 2026 at 12:04 MST

Meta Quest 3: Charging pogo pinout - diy replacement of dock

Wed, 11 Mar 2026 08:56:43 -0700

I want to make myself a charging dock out of the box the headset came in but I'd need to know the pinout and possible handshake I would need to mimic. Could anyone who has the dock measure the voltages and see/record and communication over the data pin?

⟐ Commented maart 11, 2026 at 8:56 MST

Meta Quest 3S: My Meta Quest 3S has a black screen after recommend fix of a sensor

Wed, 11 Mar 2026 06:09:21 -0700

(I am an owner of a Meta Quest 3S and the problem at hand is that the headset is stuck In a black screen but what happens is that there is still audio and the use of menú buttons still emits sound and the start up animation still reproduces and the boot menu is still accessible and visible but menús, power options, turn off & on pop ups are not visible as well as the cameras

The meta quest forum and the reddit community offered the idea to factory reset and to update using the side load update through the official meta quest web and the original problem of the menú just appearing and the controllers bring useless i reset it and the result was that the proximity error disappeared but the black screen is still there

Soy dueño de un casco Meta Quest 3S y el problema que ha ocurrido es que la pantalla del casco se queda en negro pero aún emite sonido se puede escuchar el abrir y cerrar de menús y se puede ver qué la pantalla sigue funcional ya que se pueden ver la animación de inicio y el menú de booteo es funcional se ve y funciona pero los menús, opciones de apagado y avisos de apagado no son visibles al igual que las cámaras

La comunidad de meta Quest en reddit y el foro oficial me han dicho de formatear el casco y utilizar la opción de actualizar a través de side load desde la página oficial de meta Quest una vez actualizado el error original de la pantalla de buscando posición en sala no fue un problema pero la pantalla en negro sigue siendo un problema constante

⟐ Answered maart 11, 2026 at 6:09 MST

Meta Quest 3S: Headset's tracking completely stopped working

Wed, 11 Mar 2026 06:01:32 -0700

I was playing VRChat on this headset and the tracking on it completely stops working where the cameras are off and the microphone only works if I hold the power button (after 5 seconds of holding it would shut it down) as well as the controllers not responding to anything beside the quest menu button so I had to use the head direction movements and volume buttons to navigate around the menus. I went to the Headset Tracking option and the switch is stuck on as it won't let me toggle it at all.I'vr also used ADB to clear the data of all the oculus system apps and restart it to safe mode but it didn't fix the problem. Is there something wrong with the hardware or does it need to be factory reset?

⟐ Answered maart 11, 2026 at 6:01 MST

Meta Quest 3S: How can I replace or fix the headset battery be cause I over charged i

Tue, 10 Mar 2026 04:14:48 -0700

My little brother was charging his headset overnight and during school but when he got home the battery was charging later found out that he overcharged it how can we fix it?

Meta Quest 3: It will be Possible to do a USB-C Port Replacement?

Sun, 08 Mar 2026 21:55:03 -0700

My Quest 3 USB port is only allowing charging, plugging it on my pc it gets unrecognized but seen, for now im using adb, but i prefer when i can connect it to my pc.

⟐ Commented maart 08, 2026 at 21:55 MST

Meta Quest 3S: How do I fix my stick drift?

Sun, 08 Mar 2026 13:07:16 -0700

I’ve had my Meta Quest 3s since December 31st. Its August 21st as of this being posted, It’s been about a week and i’ve had really bad stick drift issues, especially on my right controller. i’ve tried to recalibrate and clean my controllers, like the official guide says, but i’m still met with issues. What can I do without completely replacing my controllers? help!

⟐ Commented maart 08, 2026 at 13:07 MST

Meta Quest 2: How do I fix stick drift?

Sat, 28 Feb 2026 09:20:04 -0700

I have hit both of my controllers and stick drift is a common problem, how do i fix it

Meta Quest 3S: Meta Quest 3S Won't Charge – Intermittent USB-C Connection Issues

Fri, 27 Feb 2026 21:07:20 -0700

I purchased a Meta Quest 3s 3 weeks ago. It was working fine until 2 days ago.

When I plug it into the provided USB-C charger, it connects and disconnects intermittently. Initially, it struggled to maintain a stable connection for about an hour before it finally began charging. After my next use, the battery drained completely, and now it won’t charge at all. Occasionally, it briefly makes contact, but it immediately disconnects again.

It's been 40 minutes and it isn't charging. I've tried multiple adapters, cables and outlets.

I'm in Argentina, and Meta Support say they can't send replacements.

Any idea how I could go about fixing it?

Thank you!

Here's an image of the USB-C port.

⟐ Answered februari 27, 2026 at 21:07 MST