⟐ Commented maart 07, 2025 at 4:00 MST

⟐ Answered november 14, 2024 at 13:48 MST

Graag advies.

⟐ Answered april 13, 2026 at 2:08 MST

⟐ Answered november 09, 2025 at 1:29 MST

⟐ Answered juli 17, 2025 at 0:19 MST

⟐ Answered juni 18, 2025 at 13:11 MST

⟐ Answered november 14, 2024 at 13:54 MST

Het scherm van mijn e-reader is defect. Ik wil alle boeken die op de e-reader staan er afhalen met een computer. Als ik de e-reader nu op een computer aansluiit, wordt hij niet als een schijf weergegeven. Normaal moet je op het scherm van de e-reader een akkoord geven om de gegeven op een computer zichtbaar te laten worden. Maar dit is nu niet mogelijk omdat het scherm defect is. Hoe kan ik toch bij de boeken op mijn e-reader komen om die over te zetten op mijn nieuwe e-reader?

Groeten,

Peter

⟐ Answered november 14, 2024 at 13:53 MST

⟐ Answer accepted april 26, 2026 at 7:14 MST

⟐ Answered maart 27, 2026 at 19:45 MST

⟐ Answered oktober 10, 2025 at 10:54 MST

Anyone know?

⟐ Commented september 18, 2025 at 13:00 MST

⟐ Answer edited mei 16, 2024 at 12:20 MST

To repair, do I need to purchase an entire screen, or would replacing the front cover sufficient?

Thanks

⟐ Answer accepted augustus 27, 2025 at 20:15 MST

I have a Kobo Clara 2E which, right after being unplugged from a computer, stopped working. After reading online this device uses an SD card for internal memory, I suspected the filesystem was corrupted.

I opened the device and tried to remove the SD card, which was glued in place. While trying to wiggle it out with tweezers, I accidentally scratched the PCB, as shown in the attached pictures.

The SD card did eventually come off, but even after writing a working image to it, the Kobo still isn't turning on. This is, I imagine, caused by the scratched tracks. Based on the pictures, would you agree? Is there a way I could fix the two tracks?

Thank you for reading, I greatly appreciate any help!

[Edit] Posting extra pictures and adding some context.

After the Kobo was unplugged from the computer, it stopped working correctly, despite having been ejected before unplugging. Initially, the screen was stuck showing the eject screen as if still plugged in, but after attempting to reset it, the screen turned blank. Each time it was turned on, the LED blinked a few times, the screen swapped between black and white a few times too, and nothing else happened.

It was at this point that I opened the device and accidentally scratched the PCB attempting to remove the SD card. After writing a working image to the SD card and putting it back together, it stopped turning on. I then tried rewriting the SD card with the original data, which I had previously backed up, but it still does not turn on.

Here's some more pictures of the PCB:

⟐ Commented maart 02, 2025 at 4:34 MST

⟐ Answered maart 27, 2026 at 19:50 MST

I'm attempting to determine if the screen is in any way compatible with the N365B model. It seems as though it's not, but I was hoping for a definitive answer. If not, any guidance on where I may be able to source one would be greatly appreciated, as Kobo Support was not of any assistance.

⟐ Commented maart 13, 2026 at 23:40 MST

Whenever I recharge my kobo, the backlight will stop working for a period of time that can range from a few hours to several days.

I've done quite a few tests to try to troubleshoot the problem with no success.

The level of battery does not seem to be directly connected as I encounter the problem no matter if I recharge when the battery is low or high and how long I recharge for.

Factory reset will always instantly fix the problem.

I would really appreciate any insight.

⟐ Commented augustus 17, 2025 at 0:22 MST