iFixit - Answers With Device "Drill"

Power Drill: Demonteren van een Bosch GBH 2-23

Sat, 08 Nov 2025 14:09:14 -0700

Hallo

IK wil deze klopboormachine uit elkaar halen om er nieuwe vet in te doen

Heeft iemand een tip om de keuze schakelaar te demonteren en of heeft iemand dit al eens gedaan

Groet

Freddy

⟐ Answered november 08, 2025 at 14:09 MST

Bosch PBH 3000-2 FRE: Boorhamer (Bosch PBH 3000-2 FRE) reageert totaal niet

Sun, 21 Jan 2024 23:44:31 -0700

Tijdens het verwijderen van pleister (stucwerk) verminderde plots het vermogen(slagkracht) en waren er achteraan (zichtbaar door de ventilatiegleuven) meer vonken/glinsters te zien dan anders. Daar ik slechts nog een heel klein stukje moest doen werkte ik nog even door met na enkele seconde als gevolg een licht plofgeluid en niets meer. De machine doet helemaal niets meer onafhankelijk de stand (boren/beitelen).

Door de extra vonken/glinsters en het vermogen verlies dacht ik aan de koolborstels. Echter ondanks deze machine al ouder is dan 10 jaar is hij heel weinig gebruikt (enkele uren max 10uur) en als ik hem open, lijken de koolborstels nog vrij goed (lang) en goed contact te maken.

Heeft iemand een idee wat het zou kunnen zijn (toch koolborstels of iets anders)? Advies/tips hoe ik het kan analyseren/diagnosticeren worden zeker gewaardeerd.

Alvast bedankt.

Mvg,

Sam

⟐ Answer accepted januari 21, 2024 at 23:44 MST

Bosch Electric Drill 1006VSR 2009: Want to learn repairs of this drills

Mon, 27 Apr 2026 00:38:44 -0700

Need someone to teach me how to repair this electrical drills

⟐ Commented april 27, 2026 at 0:38 MST

Black and Decker LDX 120C: Black and Decker 20 volt Battery wont charge

Sat, 25 Apr 2026 16:36:02 -0700

I have 2 Black & Decker 20 volt "Matrix" batteries.

During another household project, I used the battery as a power supply for something else. Low draw, was not getting hot. Discharged down to 17 volts. Now when I plug it in, charger just shows "bad battery".

Another just shows "bad battery" on the charger when I plug it in. It's practically new but I have no insight on that one.

Anyone familiar with how these opperate that might have a fix at least for the first one? My suspision is that somehow the battery knows it was used for something it should not have been. If that's the case...can it be reset?

Same problem with older 18 volt "Firestorm" battery. This could be age...but every battery (3) shows bad?

⟐ Commented april 25, 2026 at 16:36 MST

Makita 6010d: How can I replace the motor brush on my 6010D?

Mon, 20 Apr 2026 12:32:14 -0700

I have a Makita 6010D that is not working, and I think I need to replace the brushes for the motor. How do I do that?

Dewalt Hammer Drill DCD995 TYPE 1 2014: Motor will not turn

Mon, 20 Apr 2026 10:41:51 -0700

I need a replacement motor

Ridgid R7111: Taking drill bit head off

Sun, 19 Apr 2026 13:10:05 -0700

How to take the drill head off to replace the gripping teeth?

⟐ Answered april 19, 2026 at 13:10 MST

DeWalt DW920: Why is my drill not charging?

Fri, 03 Apr 2026 05:49:42 -0700

When i place the battery pack on the charging station, the battery not charge.

⟐ Commented april 03, 2026 at 5:49 MST

Bosch Hammer Drill HD182 2016: it is not working

Tue, 31 Mar 2026 21:35:18 -0700

not working

DEXTER 500W electric hand drill: Chuck is stuck! Won't loosen or tighten

Tue, 31 Mar 2026 09:13:00 -0700

The chuck is stuck and I can't close it to insert a drill bit. It doesn't turn when you hold it to tighten or loosen. Any ideas? TIA

Other Brand Power Drill: Meri motar garam ho ja rhi hai My motor is getting hot

Mon, 30 Mar 2026 19:35:08 -0700

Meri moter garam ho ja rhi hai aur smell bhi a rhi hai

Translation Hindi-English

My motor is getting hot and it smells too

⟐ Edited maart 30, 2026 at 19:35 MST

Bosch Hammer Drill 11264EVS PROD 3611B 2008: green light is on and no power

Sat, 28 Mar 2026 11:45:49 -0700

green light is on and no power

Dewalt Impact Driver DC825 TYPE 2 2012: Burning smell immediately when operating

Tue, 24 Mar 2026 21:15:54 -0700

What can the faint burning smell be

Ridgid Impact Driver: subcompact impact driver shuts off randomly

Mon, 23 Mar 2026 06:22:54 -0700

Shuts off randomly. Disconnecting the battery resets it and it goes back to working properly until it stops again.

Black Decker Hammer Drill: Why is my drill wont rotate , just hammer

Fri, 20 Mar 2026 07:24:43 -0700

My drill hummer wont rotate when i turned it to a drill function while the motor is on

Milwaukee Hex Impact Driver 2656-20: Impact driver will not turn on

Thu, 19 Mar 2026 21:26:55 -0700

When the trigger is pressed nothing happens and battery is good.

⟐ Commented maart 19, 2026 at 21:26 MST

Drill: كيف توصل اسلاك كهرباء الدريل

Mon, 16 Mar 2026 08:56:58 -0700

كيف توصيل اسلاك كهرباء الدريل

Dewalt Electric Drill DW106 TYPE 2 2014: Drill bits slipping out of chuck

Fri, 13 Mar 2026 13:00:45 -0700

not all, but some

DeWalt DC970: What's the biggest 20V pack that can be SAFELY run?

Sun, 08 Mar 2026 00:54:35 -0700

I have a DeWalt DC970 from years ago and no batteries as they are dead. That said, I have primarily moved to 20V tools but this drill still works just fine; I just cannot buy the original batteries as they were discontinued being NiCd 18V. The batteries have long since been scrapped and were discontinued in 2021. I have XR and Atomic 20V tools as well as one standard non XR saw I keep as a backup to the XR saw. I once had two packs and the drill was shipped with 1.2Ah batteries but I know DEWALT sold 4Ah NiCds at one point too.

Despite having the higher end tools, I still want to keep this one around for jobs I do not want to run my good XR drill on. I have the DCA1820 and 4x 5Ah packs (18650-based) and 2 PowerStacks (5Ah/1.7Ah), so I am wondering what the sweet spot for the older 18V tools is. I did look into a brushless 20V entry level drill on sale for the batteries, but I looked into that years ago before I got 6 20V batteries. I don't think that plan makes as much sense now unless I get some insane deal on a 20V Brushless with 2 2Ah batteries.

⟐ Answer accepted maart 08, 2026 at 0:54 MST

Dewalt Cordless Drill DC759KA TYPE 2 2012: Why is it not turning

Sat, 07 Mar 2026 21:55:18 -0700

Why is it not turning

⟐ Answer edited maart 07, 2026 at 21:55 MST