iFixit - Active Questions With Device "Blender"

Magic Bullet: De onderkant van de gekruiste mes is kapot. Graag een nieuwe!

Tue, 09 Sep 2025 05:31:29 -0700

De onderkant van de gekruiste mes is versleten. kan ik een nieuwe gekruiste mes bestellen. MB1001B

⟐ Commented september 09, 2025 at 5:31 MST

Nutri Ninja BL450: Why does the blender get loud and smell?

Tue, 26 May 2026 16:44:32 -0700

The blender started being much louder and there is a burning smell coming out of the base. Where should I start if I want to fix it?

Should I order any parts? Or can I just maybe grease it somewhere?

⟐ Commented mei 26, 2026 at 16:44 MST

KitchenAid Blender 5KSB52 Ultra Power Machine: Why is it not working

Fri, 22 May 2026 05:03:30 -0700

When I was using it suddenly the blender start smelling and after it stop working

Magic Bullet NutriBullet: Cup stuck to base of NutriBullet

Tue, 05 May 2026 00:08:02 -0700

The cup of the magic NutriBullet is stuck to the base , can’t remove it

⟐ Commented mei 05, 2026 at 0:08 MST

Ninja Professional Blender 1100 watt: Why is the power light blinking?

Mon, 04 May 2026 17:28:13 -0700

I plugged my blender in and hit the power button, but when I select a speed or press pulse, it wont blend. The red power light just keeps blinking.

⟐ Commented mei 04, 2026 at 17:28 MST

Ninja Kitchen System Pulse: Where can I find replacement parts?

Wed, 08 Apr 2026 03:35:40 -0700

I wanted to purchase the cookie dough paddle and blade so I can whip up some yummy cookies and homemade pizza dough. However, I can't seem to find these anywhere. Where is a reliable place to purchase?

⟐ Commented april 08, 2026 at 3:35 MST

HDP109WG: Hand mixer foot disassembly

Tue, 31 Mar 2026 17:54:58 -0700

The bearing on this hand foot has given up. How to open it up? Is the plastic glued and the blade riveted and so it cant be dismantled?

BlendJet 2: It bms switch has been broken

Tue, 31 Mar 2026 00:45:45 -0700

It bms switch has been broken

Magic Bullet NutriBullet: Why does the NutriBullet leak?

Sun, 29 Mar 2026 13:14:30 -0700

There is spillage coming from my NutriBullet.

⟐ Commented maart 29, 2026 at 13:14 MST

Nutribullet 1000 (NB-202): Noisy motor bearing on operation

Sun, 22 Mar 2026 17:03:00 -0700

Has anyone repaired a failing/noisy motor bearing on a Nutribullet 1000, NB-202, and can provide a link to the correct sized replacement bearing?

The unit is still blending well, but I can't help but notice that the motor bearing is becoming louder and louder - and am hoping to repair it before failure.

Ninja Professional BL610: WHy my Ninja CO610B red light is blinking and can't start

Mon, 09 Mar 2026 11:36:43 -0700

Why my Ninja CO610B red light is blinking and can't start

Magic Bullet NutriBullet: Why is my motor smoking?

Mon, 02 Mar 2026 11:50:25 -0700

Motor smoking and smells like burned plastic?

Ninja Professional Blender 1100 watt: Why won't it turn on

Fri, 27 Feb 2026 13:38:43 -0700

My ninja blender 1100 won't turn on at all please help me fix it.I checked everything except for the engine.I put the cup in and the light won't turn on.

⟐ Commented februari 27, 2026 at 13:38 MST

Bamix Pro-3 NSFY: My motor is broken and is not rotete

Wed, 25 Feb 2026 09:02:35 -0700

It has lickage

Magic Bullet NutriBullet: Why aren't the top and bottom wheels locking together?

Fri, 20 Feb 2026 17:40:23 -0700

Both top and bottom male/female wheels supposedly to lock for spinning, aren’t actually locking correctly hence smoke is produced, I would assume due to the friction of an imperfect lock. How to resolve? I’ve tried disassembling from the base but it just seems a hassle of a job considering that I’m not even sure I can find replacement wheels. It seems one of the wheels was consumed by the friction initiated with power on. Help!

⟐ Answered februari 20, 2026 at 17:40 MST

Cuisinart Smart Stick CSB-75: The lock/unlock button does not stay locked

Fri, 20 Feb 2026 13:48:55 -0700

just bought Cuisinart smart stick csb-75 and the lock/unlock button does not lock when pressed in.

⟐ Commented februari 20, 2026 at 13:48 MST

Magic Bullet NutriBullet: My nutribullet cup won’t fit into the base

Thu, 19 Feb 2026 19:30:44 -0700

My nutribullet cup will not fix into the base anymore

⟐ Answered februari 19, 2026 at 19:30 MST

Blendtec Total Blender: Is this repairable or is it time to move on?

Thu, 12 Feb 2026 18:57:28 -0700

Is this repairable or is it time to move on?

Should I attempt to repair or move on? Also, any suggestions on the Blendtec model I should purchase next?

Picked this one up in 2009/2010 from a neighbor…$150. My family of 8 has been using it ever since. Unreal!!

Recently (over the last 6-8 months) our blendtec started sounding loud-er as if it was metal on metal. I dismantled the entire unit today and discovered the following: (see photos). Assuming the bearings wore out causing the rotor /drive shaft /commutator segments to turn off axis leading to this grinding and the pitted effect? Thoughts? Suggestions? Comments?

Purchased this Blendtec Model: ES3 Serial #: 12222 up 14 years ago from a neighbor. I’m pretty sure it’s gameover for this machine.

Update (03/26/24) ===

Here are the disassembled parts for reference. It's important to note that dislodging the rotor from the motor base—the part on which the blender jar sits—was challenging due to a snug fit. A hammer and a steel punch were needed to tap it out successfully.

⟐ Commented februari 12, 2026 at 18:57 MST

Oster 12 Speed Classic Series Blender: One common failure of the original Oster blender

Wed, 11 Feb 2026 08:55:45 -0700

This is not a question, but a comment about one common failure in tbe 1980s. I found it in a workmate's blender who gave it to me to fix it. Then I found the same problem in my mother's own blender.

The symptom is basically that the blender motor does not operate. I opened tbe blender base and studied the wiring. I found the problem quickly. One of the solder points of the wire at the commutator contacts was open. Resoldering fixed the problem. So I believe that it was caused by some assembly employee doing a bad soldering job.

Bamix Pro-3 NSFY: Motor is not working

Sat, 07 Feb 2026 12:45:39 -0700

I don't know what happened blender is not working and motor is not working

⟐ Commented februari 07, 2026 at 12:45 MST