iFixit - Answers With Device "Aircraft"

DJI Mini 4 Pro: Nieuwe dji mini 4 pro gaat niet aan

Wed, 06 Aug 2025 03:51:37 -0700

Ik heb een nieuwe dji mini 4 pro. Accus zijn vol en nog steeds gaat de drone niet aan. Wat moet ik doen?

⟐ Answered augustus 06, 2025 at 3:51 MST

DJI Phantom 3 Standard Remote Controller: Waarom kan mijn RC niet meer opladen?

Sun, 12 Aug 2018 10:27:55 -0700

Ik ben op vakantie gegaan met mijn phantom 3 standard en ineens kan ik de rc niet meer laden. Ik weet niet hoe ik dit kan oplossen.

Phantom FC40: Constant Yellow light transmitter not connecting

Sat, 05 Sep 2026 13:41:19 -0700

After upgrading the software the drone will not connect to the transmitter and I keep getting a constant yellow light. I tried to bind the controller with no luck.

⟐ Answered september 05, 2026 at 13:41 MST

DJI: Aircraft bound to another account….

Wed, 02 Sep 2026 19:08:21 -0700

Hi,

I purchased a Mavic Air 2S from EBay but I’m getting an error on the DJI Fly app that says

“Aircraft bound to another account. Change account and try again.”

I tried to reach the seller and no response. Is it possible to “unbind” the Air 2S from the previous owners DJI account?

⟐ Commented september 02, 2026 at 19:08 MST

E88 drone: My E88 Drone is working but profeler is not working

Sun, 30 Aug 2026 07:08:29 -0700

My E88 Drone is working but profeler is not working

⟐ Edited augustus 30, 2026 at 7:08 MST

E88 drone: propeller moving but not going in air

Sun, 30 Aug 2026 06:59:44 -0700

propeller moving but not going in air

⟐ Answered augustus 30, 2026 at 6:59 MST

E88 drone: My wings is playing but not moving at air

Wed, 26 Aug 2026 07:20:53 -0700

My wings is rotating but not moving at air

⟐ Answered augustus 26, 2026 at 7:20 MST

DJI Phantom 4 Pro: in my drone gimbal camera getting problem. gimbal motor over loaded

Sat, 22 Aug 2026 21:07:17 -0700

in my drone gimbal camera getting problem. gimbal motor over loaded

and landing gear brake. and front and backward sensor not working.

so please any help regarding this problem . and any repairing available at gujarat.

⟐ Answered augustus 22, 2026 at 21:07 MST

DJI Phantom 3 Advanced: My dji phantom fall

Fri, 21 Aug 2026 02:26:02 -0700

hi, when my phantom 3 standard fall , camera wont to be stable and its keep shaking ?

I checked the flat vision and gimbals cable there is nothing wrong with it ?

what can I do to get it fix

thank you

⟐ Answered augustus 21, 2026 at 2:26 MST

E88 drone: The ic is heating when battery in connected

Mon, 17 Aug 2026 09:40:52 -0700

My drone ic is heating when battery is connected

⟐ Commented augustus 17, 2026 at 9:40 MST

DJI Inspire 1: Where is the GPS module Located

Wed, 12 Aug 2026 18:33:38 -0700

Hey guys, currently trying to repair a DJI inspire 1 I need to replace the GPS module but I can’t find where it goes could someone help me I found where it connects but not where the module screws in, pictures if you can please thanks.

Mavic 2 Zoom: Mavic 2 Zoom - Accelerometer ACC0 deffective

Wed, 12 Aug 2026 01:46:30 -0700

Hello, after a crash, the Mavic 2 Zoom give me an “data error message” on accelerometer ACC0 (see attached image).

I think that the accelerometer is now defective and I wanted to know on which part of the drone is the accelerometer.

If it’s on a PCB part, I think that I will be able to change the PCB myself.

⟐ Commented augustus 12, 2026 at 1:46 MST

Sharper Image Mach X drone: Where to find spare props (propellers)

Mon, 03 Aug 2026 04:32:20 -0700

Where to find / buy spare props / propellers for the Sharper Image Mach X?

Kings Drone, who seems to be the only one to sell spare parts for a lot of these drones, does not sell them. They seem to be impossible to find!

⟐ Commented augustus 03, 2026 at 4:32 MST

Propel Spyder XL: Where can I purchase a remote for this particular drone

Sat, 01 Aug 2026 00:11:56 -0700

Where can I get a remote

⟐ Answered augustus 01, 2026 at 0:11 MST

DJI: Mavic 3t sensor system issuse

Fri, 31 Jul 2026 10:22:01 -0700

I have replaced the middle frame of mavic 3t after replacement it is showing Initiliazing sensor system error and Flight control system error. What is the possible cause.

⟐ Commented juli 31, 2026 at 10:22 MST

E88 drone: E88 drone is not going in air

Sun, 26 Jul 2026 00:15:10 -0700

N88 drone is not going in air

⟐ Answered juli 26, 2026 at 0:15 MST

E88 drone: E88 drone propeller not spinning

Tue, 21 Jul 2026 21:26:51 -0700

My drone crashed in the grass and now only three Propellers are working. How do I fix this???????

⟐ Commented juli 21, 2026 at 21:26 MST

E88 drone: Only one propellers is working

Sat, 18 Jul 2026 20:05:57 -0700

Only one propellers is working

⟐ Commented juli 18, 2026 at 20:05 MST

E88 drone: only three Propellers are working

Sat, 18 Jul 2026 19:54:44 -0700

My drone crashed in the grass and now only three Propellers are working. How do I fix this

⟐ Edited juli 18, 2026 at 19:54 MST

DJI Mini 3: DJI Mini 3 top shell stuck and getting damaged during removal

Sun, 05 Jul 2026 18:35:38 -0700

I am trying to remove the top shell of my DJI Mini 3 to retrieve a screw that fell inside. I've been following the repair guide using plastic opening tools, but the clips are extremely tight and won't release. The plastic housing is starting to get damaged/chewed up from my attempts. Is there a specific starting point or a trick to popping these clips without damaging the drone? I'm stuck on Step 1 of the shell removal. Any advice would be appreciated!