Ga door naar hoofdinhoud

How to Repair Timex t121b Buttons

Wat je nodig hebt

  1. How to Repair Timex t121b Buttons, How to Repair Timex t121b Buttons: stap 1, afbeelding 1 van 3 How to Repair Timex t121b Buttons, How to Repair Timex t121b Buttons: stap 1, afbeelding 2 van 3 How to Repair Timex t121b Buttons, How to Repair Timex t121b Buttons: stap 1, afbeelding 3 van 3
    • Unplug the alarm clock from the power.

    • Flip the alarm clock upside down and open the lid.

    • Take out the batteries and leave them aside.

  2. How to Repair Timex t121b Buttons: stap 2, afbeelding 1 van 3 How to Repair Timex t121b Buttons: stap 2, afbeelding 2 van 3 How to Repair Timex t121b Buttons: stap 2, afbeelding 3 van 3
    • Use a Phillips screwdriver to remove all of the screws on the underside of the clock.

    • Carefully lift the cover and lay it down as shown in the third image.

  3. How to Repair Timex t121b Buttons: stap 3, afbeelding 1 van 3 How to Repair Timex t121b Buttons: stap 3, afbeelding 2 van 3 How to Repair Timex t121b Buttons: stap 3, afbeelding 3 van 3
    • Flip the alarm clock until the top of the clock is facing down.

    • Take out the first screw (1.2 mm Phillips) as shown in the second image.

    • Take out the second screw (1.2 mm Phillips) as shown in the third image.

  4. How to Repair Timex t121b Buttons: stap 4, afbeelding 1 van 3 How to Repair Timex t121b Buttons: stap 4, afbeelding 2 van 3 How to Repair Timex t121b Buttons: stap 4, afbeelding 3 van 3
    • Carefully check the buttons and make sure you are able to press all the buttons.

    • Clean any dust that might be interfering with the buttons.

    • Adjust and push the alarm slide button to its proper position as shown in the third image.

  5. How to Repair Timex t121b Buttons: stap 5, afbeelding 1 van 3 How to Repair Timex t121b Buttons: stap 5, afbeelding 2 van 3 How to Repair Timex t121b Buttons: stap 5, afbeelding 3 van 3
    • Put the board back in place and place the first screw (1.2 mm Phillips) as shown in the first image.

    • Place the second screw (1.2 mm Phillips) as shown in the second image.

    • Carefully place the two halves of the clock back together and put all 4 screws (1.2 mm Phillips) as shown in the third image.

    • Open the back lid and place the batteries.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jad Abdalnor

Lid sinds: 01/18/22

145 Reputatie

1 Handleiding geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 15

Altijd: 266